|
所在平台: Coursera专项课程 |
课程主页: https://www.coursera.org/specializations/modeling-and-control-of-power-electronics
课程评论：没有评论
课程名称：电力电子建模与控制 课程概述： 本课程旨在帮助学生和工程师掌握开关模式电源转换器的设计导向分析技术。学习内容包括验证闭环调节电源转换器的设计，使用开关和平均电路仿真，设计高性能的尖峰电流模式控制和平均电流模式控制环路，以及为开关模式电源转换器设计输入滤波器。 技能提升： 学习者将获得以下技能： - 电力电子 - 电源设计 - 建模与仿真 - 光伏系统 - 电路设计 - 电力电子设计 专业介绍： 该专业共有五个课程，适合希望提升电源转换器高性能控制环路分析、建模和设计技能的学生和工程师。课程内容包括平均开关建模和仿真技术、设计导向分析技术、输入滤波器设计、尖峰及平均电流模式控制技术，以及光伏电力系统中单相功率因数校正整流器和逆变器的建模与控制。 应用学习项目： 学习者将从提供的Spice仿真示例开始，设计并验证自己的高性能闭环控制的DC-DC转换器、AC-DC功率因数校正整流器和光伏DC-AC逆变器。该专业的最后一门课程包含一个同行评分项目，学习者需在完整的5千瓦光伏（PV）电力系统中设计和测试控制环路，包括最大功率点跟踪升压转换器和单相并网逆变器。 证书： 完成课程后，将获得可分享的证书。 学习时间： 课程总时长约为4个月，建议学习速度为每周4小时。 语言支持： 课程语言为英语，提供英语、法语、葡萄牙语（欧洲）、俄语和西班牙语字幕。 推荐先修课程： 建议学习者在开始此专业课程之前，先修读《电力电子导论》、《转换电路》和《转换控制》课程。
Course Link: https://www.coursera.org/learn/averagedswitchmodelingandsimulation
Name:Averaged-Switch Modeling and Simulation
Description:Offered by University of Colorado Boulder. This course can also be taken for academic credit as ECEA 5705, part of CU Boulder’s Master of ... Enroll for free.
Course Link: https://www.coursera.org/learn/techniques-of-design-oriented-analysis
Name:Techniques of Design-Oriented Analysis
Description:Offered by University of Colorado Boulder. This course can also be taken for academic credit as ECEA 5706, part of CU Boulder’s Master of ... Enroll for free.
Course Link: https://www.coursera.org/learn/inputfilterdesign
Name:Input Filter Design
Description:Offered by University of Colorado Boulder. This course can also be taken for academic credit as ECEA 5707, part of CU Boulder’s Master of ... Enroll for free.
Course Link: https://www.coursera.org/learn/current-modecontrol
Name:Current-Mode Control
Description:Offered by University of Colorado Boulder. This course can also be taken for academic credit as ECEA 5708, part of CU Boulder’s Master of ... Enroll for free.
Course Link: https://www.coursera.org/learn/modeling-and-control-of-single-phase-rectifiers-and-inverters
Name:Modeling and Control of Single-Phase Rectifiers and Inverters
Description:Offered by University of Colorado Boulder. This course can also be taken for academic credit as ECEA 5709, part of CU Boulder’s Master of ... Enroll for free.
What you will learn
Master techniques of design-oriented analysis for switched-mode power converters.
Verify the design of closed-loop regulated power converters using switching and averaged circuit simulations.
Design high-performance peak current-mode control and average current-mode control loops.
Design input filters for switched-mode power converters.
Skills you will gain
Power Electronics
Power Supplies
Modeling And Simulation
Photovoltaic (PV) Systems
Circuit Design
Power Electronics Design
About this Specialization
2,922
recent views
This Specialization is intended for students and engineers seeking to advance skills in the analysis, modeling, and design of high-performance control loops around switched-mode dc-dc, ac-dc and dc-ac power converters. Through five courses, you will cover averaged-switch modeling and simulation techniques, techniques of design-oriented analysis, input filter design, peak and average current-mode control techniques, as well as modeling and control of single-phase power factor correction rectifiers, and inverters for photovoltaic power systems.
Applied Learning Project
Learners will start with supplied Spice simulation examples to design and verify their own high-performance closed-loop controlled dc-dc converters, ac-dc power-factor correction rectifiers, and photovoltaic dc-ac inverters. The final course in the Specialization includes a peer-graded project where learners design and test control loops in a complete 5 kilowatt photovoltaic (PV) power system including a maximum power point tracking boost converter and a single-phase grid-tied inverter.
Shareable Certificate
Shareable Certificate
Earn a Certificate upon completion
100% online courses
100% online courses
Start instantly and learn at your own schedule.
Flexible Schedule
Flexible Schedule
Set and maintain flexible deadlines.
Intermediate Level
Intermediate Level
It is highly recommended that learners take
Introduction to Power Electronics
,
Converter Circuits
, and
Converter Control
before attempting to take courses in this Specialization.
Hours to complete
Approximately 4 months to complete
Suggested pace of 4 hours/week
Available languages
English
Subtitles: English, French, Portuguese (European), Russian, Spanish
Shareable Certificate
Shareable Certificate
Earn a Certificate upon completion
100% online courses
100% online courses
Start instantly and learn at your own schedule.
Flexible Schedule
Flexible Schedule
Set and maintain flexible deadlines.
Intermediate Level
Intermediate Level
It is highly recommended that learners take
Introduction to Power Electronics
,
Converter Circuits
, and
Converter Control
before attempting to take courses in this Specialization.
Hours to complete
Approximately 4 months to complete
Suggested pace of 4 hours/week
Available languages
English
Subtitles: English, French, Portuguese (European), Russian, Spanish
