|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/water-management-modeling-using-water-evaluation-and-planning-weap/
课程评论：没有评论
课程名称：使用水评估工具（WEAP）进行水资源管理建模 课程概述：您是否希望通过创新软件学习新的水资源管理技能？您是否希望提高水评估与规划（WEAP）技能？您是否想为未来的水模型工作做好准备，面对水资源与政策管理的挑战？同时，您是否对水资源短缺和气候变化的挑战感兴趣？欢迎参加本课程！无论您是WEAP的初学者还是有一定基础的使用者，我将引导您进入水管理建模的学习旅程，帮助您掌握使用斯德哥尔摩环境研究所美国中心开发的WEAP软件进行水量平衡建模的步骤。 授课教师：我是Ahmed Al-Kebsi工程师，拥有水资源与环境的硕士学位，并曾在约旦科技大学担任助教，以及在赫尔莫赫环境研究中心担任研究助理。 课程内容： - 课时1：介绍 - 课时2：创建新的研究区域，学习如何使用世界地图创建研究区域，准备设置，添加GIS图层。 - 课时3：添加地图，学习如何将不同GIS图层添加到WEAP中。 - 课时4：构建居民用水需求站点，使用地方政府GIS图层进行设计。 - 课时5：构建污水处理厂（WWTPs），使用相关GIS图层进行创建。 - 课时6：构建水资源（地下水、河流及其他水源）。 - 课时7：建立水源与需求之间的传输链接，学习获取数据的方法。 - 课时8：建立需求站点与WWTPs之间的回流链接。 - 课时9：构建其他供水资源。 - 课时10：向模型添加集水区的表现。 - 课时11：向基准情境添加数据（分三部分讲解不同数据：时间范围、需求站点、水资源）。 - 课时12：运行当前账户（基准）情境并解读初步结果。 - 课时13：构建未来情境——人口增长情境，并运行模型。 - 课时14：建立气候变化情境并进行比较分析。 - 课时15：总结重要注意事项并结束课程。 期待在课程中见到您！
Do you want to want to learn new water resources management skills using innovative software?Do you want to improve your Water Evaluation and Planning (WEAP) skills?Do you want to get ready for your next water modeling job in water resources and policy management?Are you interested in encountering water scarcity and climatic change challenges?I am so excited to have you here!You may have some prior experience in WEAP or are just getting started.In this course, I will help you to start your water management modeling learning journey by walking you through the steps required to start water balance modeling on the WEAP, a powerful software innovated by Stockholm Environment Institute's U.S. Center.What makes me qualified to teach you?I am Eng. Ahmed Al-Kebsi, MSc. in water resources and environment as DAAD alumni. I used to be a teacher assistant at Jordan University of Science and Technology and a research assistant guest at Helmholtz Centre for Environmental Research - UFZ.Lesson 1: IntroductionLesson 2: Creating a new study areaIn this lesson, you will learn how to create a new study area using the world map. You also will learn how to prepare the settings of the study area. You will also learn how to add GIS layers to the WEAP. These layers are attached to this lesson. Moreover, in this lesson, you can find the PDF manual that includes all the steps in this course which you can use as a guide.Lesson 3: Adding mapsIn this lesson, you will learn how to add the different GIS layers to the WEAP. GIS layers of the governorates, the wastewater treatment plants, the basin, and the river layer. These layers are attached to this lesson.Lesson 4: Building domestic water demand sitesIn this lesson, you will learn how to create domestic water demand sites. For this purpose, you can use the governorate GIS layer.Lesson 5: Building the wastewater treatment plants (WWTPs)In this lesson, you will learn how to create wastewater treatment plants (WWTPs). For this purpose, you can use the WWTPs GIS layer.Lesson 6: Building water resources (groundwater, river, and other supplies)In this lesson, you will learn how to create water resources (groundwater, river, and other supplies). For this purpose, you can use the water resources GIS layer.Lesson 7: Building transmission links between sources and demandsIn this lesson, you will learn how to create transmission links. Also, it will be explained how to obtain the data for this water balance modeling.Lesson 8: Building return flow links between demand sites and WWTPsIn this lesson, you will learn how to create return flow links and what does return flow links mean.Lesson 9: Building other supply resourcesIn this lesson, you will learn how to create other supply resources and what could be represented as other water supply resources.Lesson 10: Adding catchment to the modelIn this lesson, you will learn how to represent the catchment in your study area. Lesson 11: Adding data to the reference scenarioIn this lesson, you will learn how to add different data to the model after building the schematic. These data are divided into three lectures: 11. Adding data to the reference scenario (part 1) - time horizon 12. Adding data to the reference scenario (part 2) - demand sites 13. Adding data to the reference scenario (part 3) - water resourcesLesson 14: Run the current accounts (reference) scenarioIn this lesson, you will learn how to run the current accounts (reference) scenario and how to read the initial results before adding future scenarios.Lesson 15: Build scenarios - Creating and running population scenarioIn this lesson, you will learn how to build future scenarios. The first scenario that will be created is the population growth scenario. You will also run the model and learn how powerful the WEAP is in expressing the results. Lesson 16: Creating and running scenario of climate variationsIn this lesson, you will learn how to build another future scenario which is the climate variations scenario. You will also run the model and read the results compared with other scenarios in the model. Lesson 17: Additional notes and conclusionFinally, in this lesson, some important notes will be highlighted. Also, the conclusion of this course.I hope to see you on the course soon!:)Best,Ahmed
