|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/waste-water-treatment-plants-execution-shopdrawings/
课程评论：没有评论
课程名称：污水处理厂（执行与施工图） 课程概述： 本课程旨在阐明和描述污水处理厂的各类池塘和建筑物，讲解每个池塘的目的。课程从泵站的进水开始，讲解到达初级预处理设施（筛网、油脂去除和砂分离器），接着进入初级沉淀池，再到处理单元（如流动床反应器MBBR、序批式反应器SBR、延长曝气、曝气池及其他系统）。随后，我们将学习二级沉淀池（包括矩形和圆形类型）。 课程中详细回顾了池塘图纸、土建施工注意事项以及机械设备安装的要求。之后，我们将关注污泥处理单元（如浓缩池、污泥储存池、好氧和厌氧消化器、干化床）。接下来，将清晰讲解氯化系统及其替代方案，并回顾机械设备视频以及相关图纸。另外，课程的重要组成部分涉及各类图纸（如土建指导图纸、机械图纸、电气图纸、机电一体化图纸、水力剖面、工艺计算及设计说明），我们将重点解析每种类型的使用方法，协调图纸之间的关系，并准备施工图纸。 课程的第三部分介绍了辅助建筑（如行政楼、车间、围栏、风机及变电站）。第四部分是实地考察，涉及池塘及建筑物的施工，重点讨论墙体的防水、止水、隔离和开口等重要事项。针对墙壁和屋顶的模板（木质和金属模板），课程中也进行了相应的补充。 以上内容都配有清晰的图纸、照片和来自实际污水处理厂的视频。课程包含执行污水处理厂所需的基本数据，帮助学员打下坚实的基础。
Waste water treatment plants course Main object of our course is to clarify and describe waste water treatment plants tanks and buildings , purpose of each tank We start our course with water incoming from pumpstation to headworks (screen , grease removal and sand classifiers) then prrimaty clarifier then treatment unit ( MBBR, SBR , Extended areation , areation tanks and other systems)After this we go to secondary clarifier ( rectangular and circular types ) We review tanks drawings , civil works execution precautions &requirements for Mechanical equipment installation Then we go to sludge treatment units ( thickners ,sludge holding tanks ,Aerobic and anaerobic digestor , drying beds ) Then clarify Chlorination systems and its alternatives We review tanks drawings , mechanical equipment vids Also importnt part of our course is drawings , types of drawings ( civil guide drawing, mechanical drawings ,electrical drawings , mep drawings, hydraulic profile , process calculations and design notes ) We focuse on each type and clarify how to use it , coordinate between drawings and prepare shop drawing. Thired part of our course , secondary building ( administration, workshop , fence , blowers & substation )Fourth part going to site , execution of tanks and buildings , important notes for wall puddles , water stops ,isolation and openings )Form works ( wooden ,metal ) for walls and roofs is important so we add part for it on our course.All above with clear drawings , photos and videos from real waste water treatment plants Course contains required data that you need to start execution plant
