|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/virtual-ccna-lab-network/
课程评论：没有评论
本课程旨在教授学员如何构建自己的虚拟CCNA和CCCNP网络实验环境，并且无需使用模拟器。 **课程亮点：** * **超越传统模拟器：** 与Cisco Packet Tracer等模拟器相比，本课程使用更真实、功能更全面的Cisco IOS和IOS XR路由软件（提供免费试用版）。这确保了对CCNA认证所需命令和许多CCNP、CCIE技术（包括BGP和MPLS）的完整支持。 * **克服GNS3的局限：** 区别于GNS3的用户界面复杂且需要Cisco合同访问镜像的缺点，本课程的解决方案基于顶级的商用级Hypervisor（ESXi）和免费的Cisco路由软件试用版。 * **低成本实现：** 您只需要本课程、免费或低成本的软件以及一台闲置的电脑即可搭建实验环境。 **课程内容概览：** * **准备阶段：** 学习如何规划IP地址和设计网络。 * **Hypervisor平台搭建：** 指导您获取、下载、安装和配置Hypervisor（ESXi），以及如何在其上安装和配置虚拟机（包括Windows和Linux服务）。 * **虚拟路由器部署：** 教授如何创建网络拓扑图，连接网络和VLAN，安装虚拟Cisco IOS和IOS XRv 9000路由器，建立虚拟串行控制台连接，更新拓扑图，以及设置其余路由器。 * **实验（LABS）：** 包含CCNA和CCCNP级别的网络实验。 **课程特色：** * 提供免费预览章节。 * 能够学习真实Cisco IOS和IOS XR路由软件的高级功能。 * 支持实时配置备份和远程管理。 如果您对网络技术感兴趣，本课程将为您提供巨大的价值。
Labs included for CCNA and CCNP.Note: this course is unique on Udemy (and probably on most of the rest of the Internet as well). If you're the least interested in networking, you will benefit greatly from this course.The usual options today only take you so far. Emulator software such as the routers in Cisco Packet Tracer lack many of the functions and commands needed for CCNA certification, and they lack a Lot of functions and technologies for CCNP or CCIE.And GNS3 is a cheap-quality product with a difficult user interface, and it requires a Cisco contract for access to router images. Our solution is built on a top-rated, commercial-grade hypervisor (ESXi) and free demo versions of the Cisco routing software.In this course you will learn how to create a lab network using (demo) versions of the real Cisco IOS and IOS XR routing software, which contain support for all advanced routing technologies, including BGP and MPLS.All you need is this course and free (or very low cost) software and equipment, like an old left-over computer and some applications.ENROLL TODAY or try out our free sample lectures.IntroductionFREE PREVIEW: IntroductionFREE PREVIEW: Welcome care-package0. PreparationsPreparations: Creating an IP address planPreparations: Designing the network1. InstallationObtain and download the systemPrepare the installation mediaAccess the BIOS setup and change the boot orderInstall, configure and access the hypervisor2. Using the platformBasic initial configuration of the hypervisorInstalling your first virtual machineGetting a Windows license keyInstalling a Windows virtual machine [FAILED attempt]Successfully installing a Windows virtual machineConfigure IP addresses for the VMsConfigure Linux services3. Setting up the virtual routersCreating network topology diagramsLink networks and vlansInstalling virtual IOS routersVirtual serial console connectionsUpdating our network topology diagramInstalling the Cisco IOS XRv 9000Setting up the rest of the routersFREE PREVIEW: OSPF and remote sysloggingBacking up the configRemote administration4. LABS for CCNA and CCNP
