|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/the-user-guide-for-residential-construction-3-of-4/
课程评论：没有评论
这门由Coursera提供的名为“住宅建筑用户指南 - 第三部分”的课程，旨在帮助您在住宅建筑项目中实现三个关键目标：按时完工、控制预算和减轻压力。课程强调，为了成功实现这些目标，参与项目的各方（包括业主、建筑商、建筑师、设计师、房地产经纪人、分包商和供应商）必须深入理解施工阶段的顺序、每个阶段的内容以及做出选择和决策的及时性，以确保材料按时到位，避免项目延误。 课程特别关注“粗装阶段”，认为这是项目中的关键环节，因为此时所有的基础设施（如管道、暖通空调和电气系统）都将被安装。这些粗装工作对框架结构有重要影响，因此在框架完成后之前，必须完成材料选择和布局决策。 课程将详细阐述各个粗装阶段（包括粗装管道、暖通空调和电气）的工作范围，并重点说明何时需要做出选择和决策，以确保材料能够及时供应。课程通过具体案例说明了决策延迟的潜在问题，例如： * **粗装管道阶段：** 如果淋浴阀门和玻璃纤维浴缸未被选中和到位，水管工将无法进行管道布局和定位。 * **粗装电气阶段：** 如果在安装电线时未选定烤箱，电工将无法确定正确的电线尺寸，可能导致后续需要返工。 总之，本课程将为您提供宝贵的知识和工具，帮助您避免代价高昂的错误，有效达成项目目标，并找到属于您的施工节奏，这得益于讲师22年的行业经验和超过1亿美元的项目完成量。
The key objectives for a successful construction project are to: 1) Stay on schedule 2) Stay on budget 3) Minimize Stress. In order to achieve these objectives, it is critical for all parties involved to fully understand the order of the phases of construction, what is included in each phase of construction and when the selections and decisions must be made so the materials are available in time to keep the project going without delay. The construction team, which consists of the owner, builder, architect, designer, realtor, and the subcontractors and vendors can all benefit from the knowledge and tools in this course. To gain the holistic understanding of the residential construction process this course provides can take decades of blood, sweat and tears. Please allow my lessons learned from 22 years of experience and over $100,000,000 worth of projects completed to help you avoid costly mistakes, nail the key objectives, and to find your construction flow.The rough in phases are where the rubber meets the road for any construction project. All of the critical infrastructure of the home is installed during the rough phases. Also, all of the rough in phases can have impacts on the framing so it is very important to have the material selections and layout decisions done before framing is compete. The rough Plumbing, HVAC & Electrical work needs to be properly specified and detailed so the finished products, which will be installed at the end of the job, will work with the systems that are installed during the rough phases. I will give a few examples of this in just a moment.In order to be sure all the selections and decisions are complete it is important to understand the scope of each rough in phase in advance. In addition to understanding the scope it is critical to understand how far in advance of each phase to make the selections and decisions to ensure the materials will be available when the work begins. The modules in this section of the course will detail the scope and decision timing for all the rough in phases.Here are a few examples of how selections and decisions can impact the work completed in the rough in phases. First, in the rough in plumbing phase if the shower valves and any fiberglass tubs are not selected and available the plumber can't complete their work as they will not have the necessary materials. In this same scenario the plumber would be lacking the information to properly size and locate the water lines and the sewer lines. A second example comes from the rough electrical phase. If the oven is not selected when the wire is being installed the electrician will not know what wire size to install. All ovens do not use the same number of amps so if the wrong wire size is installed it may result in cutting walls open later to install a new wire all the way from the electrical panel. This can be a costly revision if this scenario occurs. These are just two examples of the many selections and decisions that are covered to ensure that the rough in phases go smoothly for your project.
