|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/the-basic-woodworking-kit/
课程评论：没有评论
**课程名称：** 基础木工套装 (The Basic Woodworking Kit) **课程概述：** 本课程旨在为初学者提供一个全面的木工入门指南，帮助他们了解完成几乎任何木工项目所需的必备工具、配件和常用耗材。 **学习目标：** * 了解基础木工工具及其用途。 * 掌握初学者必备的基本配件。 * 熟悉木工常用的以及应常备的耗材。 **课程内容：** 1. **绪论 (1:00)**：简单介绍课程内容。 2. **测量与划线 (8:37)**： * **测量工具**：卷尺、组合角尺、角度尺、直尺、圆规、卡尺、美工刀。 * **划线工具**：铅笔。 3. **锯子 - 锯切木材 (7:49)**： * **锯子类型**：顺纹锯（ rip saw）、横纹锯（crosscut saw）、日本 Ryoba 锯、Zona 锯、齐边锯（flush cut saw）。 4. **刨削与打磨 (8:17)**： * **刨刀与锉刀**：低角度挡板刨（low angle block plane）、日本锉刀（Japanese rasp）、砂纸块。 5. **钻孔与螺钉 (17:08)**： * **钻孔基础**：导孔（pilot holes）。 * **电动工具**：电钻（有线或无线）。 * **钻头类型**：木工钻头（wood bits）、沉头钻头（countersink bits）、螺丝刀头（driver bits）、扁钻（spade bits）。 6. **配件 (9:05)**： * **夹具**：快速夹、F型夹、管夹。 * **辅助工具**：工作马（bench horses）、靠山（bench hooks）、垫板（cauls）。 7. **常用耗材 (10:41)**： * **胶水**：Titebond 胶水、蓝胶带、包装胶带、速干胶、环氧树脂胶。 * **螺钉**：不同尺寸（#6, #8, 3/4 和 1 1/4 英寸）。 * **砂纸**：不同目数（80, 100, 120, 180, 220 grit）。 * **其他**：固态蜡（paste wax）、扑克牌、红橡皮擦。 该课程内容详尽，从基础测量工具到各类锯子、刨刀、钻头，再到实用的夹具和常用耗材，全方位地为木工爱好者打下坚实的基础。
Learning objectives: You will learn the following in this course: - the essetial tools and their uses - what basic accessories are needed by every woodworker - what supplies you should always have on hand as a woodworkerDescription:This course is meant to inform the beginning woodworker of what is needed to accomplish almost any woodworking project. The basic tools for measurement and layout are explained. The various types of saws and their uses are outlined, including those for rip cuts, cross cuts and dovetail cuts. We recommend a couple of key chisels in every woodworkers tool box. For smoothing and shaping, the reason for a low angle block plane is explained, the Japanese rasp is discussed and how it is efficient for shaping, and of course, the ubiquitous smoother - sandpaper is thoroughly covered!Drills, drilling and screwing are also discussed including the range and types of drill bits, as well as what drill bit size to use for a screw pilot hole. The countersink and auger bits required for proper fastening and drilling are also covered in this course.Course content: - Lecture 1: Introduction (1:00) - Lecture 2: Measurement and Layout (8:37) - Tape measures - Combination square - Bevel gauge - Rulers - Compass - Calipers - Pocket knife - Lecture 3: Saws - Making Wood Cuts (7:49) - Rip saw - Crosscut saw - Japanese ryoba saw - Zona saw - Flush cut saw - Lecture 4: Planing and Smoothing (8:17) - Planes and Rasps - Low angle block plane - Japanese rasp - Sanding blocks - Lecture 5: Drills and drilling (17:08) - Pilot holes - Electric drills/ corded or battery - Wood bits - Countersink bits - Driver bits - Spade bits - Lecture 6: Accessories (9:05) - Clamps -- Quick acting clamps -- "F" clamps -- Pipe clamps - Bench horses - Bench hooks - Cauls - Lecture 7: Supplies - what you should have handy (10:41) - Titebond glue - Blue tape - Packaging tape - Crazy glue - Epoxy glue - Screws (#6, #8, 3/4 and 1 1/4 inch) - Sandpaper (80, 100, 120, 180, 220 grit) - Paste wax - A deck of cards - Pencils - Red rubber eraser
