|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/primary-process-control-and-pid-tuning/
课程评论：没有评论
课程名称：基础过程控制与PID调节 课程概述：本课程旨在满足控制室操作员、DCS技术员、过程控制工程师、应用工程师等负责工厂PID调节人员的需求。随着越来越多的新人员进入控制室，处理多种类型的工艺和不同的DCS和PLC系统变得尤为重要。课程从过程控制的基础知识开始，解释PID方程在时间域中的应用，并使用三种强大的PID调节、实时模拟/优化和评估软件进行培训。学生将在短时间内学习如何优化PID的调节，应用于蒸馏柱、反应器、储罐、压缩机、流量控制器和热交换器等工艺。 该软件具备自动评分功能，课程结束后会生成每位参与者的PID调节技能报告。这门课程为参与者在DCS/PLC相关标签构建、控制系统设计以及计算调节参数方面提供了良好的基础，能够科学地进行PID和其他控制方案的调节，而非依赖传统的试错法。 学习成果：完成本课程后，参与者将能够在任何DCS/PLC上调节PID，解决问题，消除振荡，提升控制器性能，从而最大化产量，直接提高工厂的利润。通过在实时PID调节模拟器上的实践，参与者将获得在实际操作工厂的DCS/PLC上进行PID调节的巨大信心，而这种信心通常需要数年工作经验才能获得，现可在短短两天内实现。 本课程面向所有人：工程师、技术员、操作员、学生，无论是新手还是有经验的从业者，内容易于理解。我们的PID100培训课程涵盖了工业过程控制和PID调节的基础知识，强调实践操作，学生可以在个人笔记本上下载并安装过程控制软件产品，课程使用的都是工业界实际应用的大型软件。 我们的讲师拥有超过30年的工业和过程控制培训经验，具备丰富的技术知识，能够确保参与者全程参与并集中注意力。 作为该培训课程的一部分，参与者仅需安装以下两个强大的软件产品（7天免费试用）： - SIMCET - 实时PID调节训练模拟器 - PITOPS - 系统识别、PID调节与优化、自动过程控制设计 软件的安装和激活请联系 info@picontrolsolutions.com，该软件仅限教育用途，禁止工业或商业使用。 如果您希望更深入地参与和注册关于基础过程控制、PID调节及其他相关课程，请直接联系 info@picontrolsolutions.com。在更全面的培训课程中，您将学习如何使用微分作用和PV滤波器、如何进行更复杂的系统识别、如何进行合适的工厂阶跃测试，以及如何设计和调节级联链和PID回路。 完成我们的全面PID100培训课程后，您将获得国际过程控制专家证书，并可以安装我们的模拟和优化过程控制软件，使用时间超过一个月。如需更多信息，请联系 info@picontrolsolutions.com。
This course addresses the needs of control room operators, DCS technicians, process control engineers, applications engineers, and anyone else responsible for PID tuning in the plant. Many new personnel enter the control room these days; there are numerous types of processes and different DCS and PLC systems.This course starts with the basics of process control, explains the PID equation in the time domain, and then trains using three powerful PID tuning, real-time simulation/optimization, and grading software products.In a remarkably short time, students learn to optimally tune PIDs and make process changes on distillation columns, reactors, tanks, compressors, flow controllers, and heat exchangers using modern real-time simulator software.The software also has automatic grading capability, so at the end of the course, the software generates a report card on the PID tuning skills of each attendee.This course provides a good foundation, skills, and knowledge for all DCS/PLC-related tag building; control scheme design in a DCS/PLC; and the ability to calculate tuning parameters not only for PIDs but other control schemes without the old trial-and-error method but scientifically.Learning Outcomes:After completing the course, attendees will be able to tune PIDs in any DCS/PLC, troubleshoot problems, dampen/eliminate oscillations, and improve controller performance, all of which help maximize rates, directly increasing the plant's bottom-line profits.Through practice on a real-time PID tuning simulator, attendees will gain tremendous confidence in PID tuning on live DCS/PLCs in actual operating plants. This confidence that would otherwise have taken several years on the job now can be achieved in just two days. Attendees will also learn many important and practical concepts about DCS/PLC operations.Our PID100 (Primary Process Control and PID Tuning) training course is very practical, and easy to understand for everyone: engineers, technicians, operators, and students - both new and experienced. That is why our customers consider us the best.This training course covers the basics of practical industrial process control and PID Tuning, all in the time domain. Our course is more hands-on than any competitor. Students can download and install process control software products on their personal laptops for use during our process control training. The software products are full-blown industrial process control software applications used by the industry. This level of hands-on approach tremendously aids the learning process and mastering process control theory and practicals.Our instructors have over 30 years of industrial experience and process control training experience. They not only have the technical process control knowledge but also skills to make sure participants are fully engaged and able to concentrate on the material.As part of the Udemy PID100 training course you will only get the possibility to install the following two powerful software products on your own computers ( 7-day free trial): • SIMCET - real-time PID tuning training simulator • PITOPS - system identification, PID tuning and optimization, and APC designFor installation and activation please contact us at info@picontrolsolutions.com. The usage of the above software packages is only limited to educational purposes, not for any industrial or commercial use.If you would like to participate and enroll in more detail and a full-blown course on primary process control, PID tuning, and beyond, please contact us directly at info@picontrolsolutions.com. In our wider training course, in addition to Udemy topics, you will learn how to use Derivative action and PV filter, how to do more complex system identification, how to do appropriate plant step tests, and also how to design and tune cascade chains and PID loops.After completion of our full-blown PID100 training course, you will get an international diploma as a process control expert in the field of primary process control and PID tuning, and you will get also possible to install our simulation and optimization process control software for the time period of more than one month. For more information, please contact us at info@picontrolsolutions.com
