|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/piping-material-specification-pms/
课程评论：没有评论
**课程名称：管道材料规范（Piping Material Specification - PMS）** **课程概述：** 本课程专注于讲解管道材料规范（PMS）的编制，这是化工项目EPC（工程、采购、施工）过程中由机械工程师负责的最关键的文档之一。PMS的编写需要与工艺工程师紧密合作，在P&ID（管道及仪表流程图）开发阶段同步进行，因为它直接影响管线编号，并被所有相关方参考。 PMS是确定管道、阀门、管接头、法兰、垫片和紧固件规格，以及选择现场仪表（如控制/安全阀、流量计、变送器等）的材质（MOC）、压力等级和连接方式的主控文件。因此，PMS的编制必须一丝不苟，确保准确性，因为它直接影响采购流程和成本。同时，PMS也是项目图例与符号表（Legends & Symbols Sheet）的重要输入信息。 **课程内容：** 本课程将提供编制PMS的**分步指导**，涵盖需要参考的**相关规范和标准**，并提供详细的**模板示例**。PMS的编制通常需要与工艺工程师或工艺顾问协商完成。准确的PMS对于所有项目都至关重要，因为它直接影响采购，并且由于其与管道和仪表之间的相互关联性，需要仔细协调，以确保所有仪表的正确安装。 **课程重点：** * PMS的重要性及在EPC项目中的作用。 * PMS与P&ID、工艺设计之间的联动关系。 * PMS在确定管道、阀门、仪表等材料、等级和连接方式中的核心地位。 * PMS编制的详细步骤和方法。 * 参考的关键行业规范和标准。 * PMS模板的实际应用和示例。 * PMS准确性对采购和项目成本的影响。
Piping Material Specification(PMS) is one of the most critical document to be generated by the mechanical engineer carrying out EPC of chemical projects. This document has to be prepared jointly with process engineer when developing the P & ID since these details are required for pipe line numbering and is referred to by all stake holders and in particular by the instrumentation engineer who is involved in generation of P & ID.PMS is the master document for finalizing the specification for pipes, valves, fittings, flanges, gaskets and fasteners and also for selection of MOC , rating and end connections of field instruments like control / safety valves, flow meters, transmitters etc. Hence, this document has to be generated diligently to ensure accuracy as this impacts the procurement process and has cost implications. This document is essential for input in the Legends & Symbols sheet created for the project.This course gives a step by step approach for generation of this critical document, the codes and standards to be referred and gives samples of detailed templates to be prepared. Preparation of this document is done in consultation with Process engineer or Process consultant. An accurate PMS is a must for all projects since this impacts the procurement as the inter connection with piping and instrumentation is involved and has to be coordinated to ensure proper installation of all instruments.
