|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/pipeline-stress-analysis-using-caesar-ii/
课程评论：没有评论
课程名称：CAESAR II中的管道建模与分析 课程概述： 该课程非常适合任何希望学习使用CAESAR II软件进行管道应力分析的工程师。课程主要涵盖以下主题： 1. 管道与管道系统的区别 2. 管道类型，包括水管道、油管道和天然气管道 3. 管道应力分析选择标准 4. ASME B31.4与ASME B31.8的主要区别：液体管道规范与气体管道规范之间的不同 5. 在CAESAR II软件中建模管道：建模管道系统以进行分析的步骤 6. 创建分析载荷情况：为特定管道系统分析生成所需的分析载荷情况 7. 分析与结果研究：研究分析结果，以了解管道系统在应力方面是否可接受 8. 应力标记与报告准备：标记所有需要修改的地方，以接受管道系统的分析结果 课程结构分为多个部分，清晰地讲解各个主题。最终部分包括一个实际案例研究，处理一个实际问题，详细展示建模步骤。管道系统的一部分按需建模，提供准确的实际工作方法。课程明确解释了错误检查、载荷情况创建和CAESAR II生成的输出结果审查的过程。 本课程旨在指导您完成管道应力分析过程，使用CAESAR II，从基础开始，到能够理解管道对齐表、创建完整的3D分析模型、选择支撑类型与位置、检查规范要求，直至完成设计图纸和报告。课程还解释了报告准备和应力标记准备的过程。
This course is perfect for any engineer interested to learn pipeline stress analysis using Caesar II software. The main topics that are covered in this course are as follows:Differences between piping and pipelineTypes of Pipelines like water pipelines, oil pipelines, and natural gas pipelines.Pipeline Stress Analysis Selection CriteriaASME B31.4 vs ASME B31.8: Major differences between ASME B31.4 liquid pipeline code and ASME B31.8 gas pipeline codes.Modeling of Pipeline in Caesar II Software: The steps that are normally followed while modeling a pipeline system for analysis.Creating Analysis Load Cases: Generating required analysis load cases for specific pipeline system analysis.Analyzing and studying the results: Studying the results to understand if the pipeline system is acceptable from a stress point of view.Stress Mark-up and Report Preparation: Marking all the changes required to accept the pipeline system after analysis.The course is constructed into various sections that clearly explain the subjects. The final part consists of a practical case study. This deals with a practical problem. The detailed modeling steps are shown. Part of the pipeline system is exactly modeled as needs to be done in actual jobs. The steps are explained clearly, then the process for error checking, load case creation, and reviewing the caesar ii generated output results are mentioned.This course is designed to guide you through the pipeline stress analysis process - using CAESAR II - starting from scratch till being able to understand pipeline alignment sheets, creating a full 3D analysis model, choosing support types & locations, checking code requirements, and finalizing the design drawings/report.The course also explains the process of report preparation and stress markup preparation.
