|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/pic16f877a-water-level-rfid-soil-sensor-project/
课程评论：没有评论
Coursera 课程摘要：PIC16F877A 单片机：水位、RFID 和土壤传感器项目 本课程旨在教授您使用 PIC16F877A 单片机进行嵌入式项目开发。您将学习三项关键技能： 1. **水位检测系统：** 掌握使用不同传感器（如 P35 浮子开关、导线感应以及专业水位模块）实现水位检测的方法。 2. **RFID 卡检测系统：** 学习如何使用 RDM6300 RFID 读卡模块，包括将其与电脑（通过 USB 转 TTL 设备）以及 PIC16F877A 单片机进行接口连接，从而读取 RFID 卡信息。 3. **土壤湿度检测系统：** （虽然在概述中提及，但在提供的详细讲座列表中未具体展开，但课程整体目标包含此项。） **课程结构：** * **PIC16F877A 单片机入门：** 介绍 PIC16F877A 单片机，讲解如何从数据手册中提取关键信息，以及可编程引脚和端口的使用。还将指导您完成单片机的初步硬件设置。 * **软件和工具准备：** 教授如何下载和安装 MikroC for PIC 编译器以及 PICKIT 3 编程器工具。 * **项目实践：** 分步指导实现上述三个项目的具体操作。 完成本课程后，您将获得一套实用的技能，能够开发与农业相关的嵌入式项目。
Welcome to Learning Microcontrollers: This course will teach you 3 things:1- Making a water level detection system.2- Making an RFID cards detection system.3- Making a soil moisture detection system.If you learn above 3 techniques then you can have a very nice skill set to make agriculrture related embedded projects.This course will introduce you to PIC16F877A microcontroller and then will lead you to setting up the hardware for first programming. After that the course teaches you how to download and install MikroC for PIC and PICKIT 3 programmer tool. And then we go for project tutorials.Introduction to PIC16F877A.Lecture 1: Introduction to PIC16F877A.Lecture 2: Learn how to extract useful data from PIC16F877A's datasheet.Lecture 3: Programmable pins and ports in PIC16F877A.Lecture 4: Setting up a PIC16F877A microcontroller for first run.Downloadng and installing MikroC for PIC and PICKIT programmer tool.Lecture 5: Download and install MikroC for PIC.Lecture 6: Download and install PICKIT 3 programmer tool.Detecting water level using PIC16F877A.Lecture 7: Water level detection using P35 float switch with PIC16F877A.Lecture 8: Water level measurement using wires using PIC16F877A.Lecture 9: Water level detection using water level module using PIC16F877A.Reading RFID cards using RDM6300 module with PIC16F877A.Lecture 10: For understanding we interface RDM6300 with computer using USB to TTL device.Lecture 11: RDM6300 module interface PIC16F877A for reading RFID cards.
