|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/mpls-on-mikrotik-with-labs/
课程评论：没有评论
**课程名称：** MPLS on MikroTik with LABS **课程概述：** 本课程深入讲解了思科（MikroTik）路由器上的MPLS（Multiprotocol Label Switching）技术。MPLS是ISP（互联网服务提供商）网络中一项核心协议，尽管其复杂性常带来部署挑战，但与RIP、OSPF、BGP等传统路由协议相比，MPLS在性能上具有显著优势，因为它采用标签（Labels）进行路由决策，并工作在2.5层，而非3层。 通过MPLS，ISP可以获得多项关键优势，包括： * **Layer 3 VPN（VRF）：** 实现基于虚拟路由和转发的第三层VPN。 * **Layer 2 VPN（VPLS）：** 提供第二层VPN服务。 * **Traffic Engineering Tunnels：** 优化网络流量路径。 * **以及更多其他功能。** 本课程从零开始，详细解释MPLS的概念和工作原理，并通过大量的实践操作（LABS）覆盖所有可能的MPLS主题。 **课程内容将涵盖：** * MPLS 导论 * MPLS 基础概念、MPLS 标签和 MPLS 过滤 * MPLS Layer 3 VPN (VRF) * MPLS Layer 2 VPN (VPLS) * MPLS Traffic Engineering **课程特点：** * **全部基于实操LABS：** 课程强调动手实践，通过实验室环境加深对MPLS的理解。 * **MikroTik 平台：** 专注于在MikroTik路由器上部署和配置MPLS。 * **灵活性：** 建议使用GNS3进行实验，因为部分实验需要模拟多达7台MikroTik路由器。当然，您也可以使用物理设备进行实操。 **目标学员：** 任何希望掌握MikroTik MPLS技术，并了解其工作原理和部署方法的ISP网络工程师和技术人员。 **建议：** 如果您渴望精通MikroTik上的MPLS并深入理解其工作机制，强烈建议您注册本课程，获取宝贵的知识和实践经验。
MPLS is a protocol that runs inside the ISP networks. Deploying MPLS is always a challenge because of its complexity. However, MPLS has a much better performance than any other routing protocol because it works on Labels for the routing decision and it works on layer 2.5 instead of layer 3 as other routing protocols such as RIP, OSPF and BGP.Using MPLS, the ISP will be able to have a lot of benefits from feature that it provides such as Layer 3 VPN using VRF, Layer 2 VPN using VPLS, Traffic Engineering Tunnels and much more.In this course, I will go through MPLS from scratch, so I am going to explain to you what MPLS is exactly and how it works, then i am going to start doing labs to cover all topics possibles in MPLS.Topics that I am going to cover in this course are:Introduction to MPLSMPLS Basics, MPLS Labels and MPLS FilteringMPLS Layer3 VPN - VRFMPLS Layer 2 VPN - VPLSMPLS Traffic EngineeringAll the course will be based on hands-on LABS, so by end of the course you will have a big understanding of how to deploy MPLS in your ISP using MikroTik Routers.To be able to follow this course, you can use GNS3 because in some LABS we require to have up to 7 MikroTik Routers. Of course if you have those routers than you can deploy them and work on physical routers to to the LABS.Finally, If you have to master MPLS on MikroTik and understand how it works, I highly advise you to register in my course and get all the information that i am going to share with you.
