|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/mikrotik-routing-engineer-with-labs-mtcre/
课程评论：没有评论
本课程旨在帮助学员深入理解MikroTik路由技术，并为MikroTik MTCRE（路由工程师）认证考试做好准备。虽然本课程并非MikroTik官方赞助或授权，但我们尊重相关商标。 **课程亮点：** * **工程级别路由知识：** 涵盖MikroTik路由的中级和工程级别知识，是获取更高级别路由认证（MTCINE）的先决条件。 * **理论与实践结合：** 课程包含扎实的理论讲解，并辅以大量实际操作（LABS）。 * **实操环境建议：** 建议学员准备至少一台PC和5个MikroTik路由器及UTP线缆。或者，可以使用GNS3软件模拟MikroTik CHR进行所有LABS，无需物理设备。 * **丰富的主题内容：** 涵盖广泛的路由主题，包括但不限于： * 特定路由（ECMP, 强制网关, 网关可达性检查, 路由标记, 路由策略, 递归下一跳） * OSPF协议（工作原理, Hello协议, LSA类型, 网络结构, 区域, 路由器类型, 邻居状态, 外部路由分发, 接口成本与类型, SPT计算, OSPF与组播, Stub/NSSA区域, 虚拟链接, 路由过滤） * VPN技术（站点到站点连接, IPIP, EoIP, PPTP, SSTP, L2TP, PPPoE） * VLAN（使用, 管理交换机, Switch Chip配置, Q-in-Q） * **目标明确：** 帮助学员全面掌握MTCRE考试所需技能，并确保顺利通过考试。 如果您想全面理解MikroTik路由的所有MTCRE相关主题，并在实践中熟练配置，本课程将是您的理想选择。
***This course is not officially sponsored by MikroTik and not an authorized course by MikroTik. We are neither affiliated with nor endorsed by MikroTik. We respect the Trademarks of the mentioned company and institution.***MikroTik MTCRE is at the 2nd level certificate from MikroTik, and it is considered in the Engineering level. This course will speak about everything related to Routing at the Intermediate level. Being MikroTik MTCRE certified is a prerequisite for the higher level Routing certificate which is MTCINEFor this reason, I have designed this course to help you understanding how Routing happens in MikroTik and be read for the MikroTik MTCRE exam. This course will contain theories but a lot of LABS. For this reason, if you want to follow this course I advice you to have 1 PC and 5 or MikroTik Routers with UTP Cables. Alternatively, you can use MikroTik CHR on GNS3 to emulate the LABS, and which GNS3 you don't require any physical Routerboards as all LABS can be done on GNS3In this course, you will learn the following topics:More specific routes ECMP How to force gateway over specific interface Gateway reachability check and route distance Routing mark and route policy Recursive next-hop and scope/target-scope usageWhat is OSPF?How OSPF protocol worksHello protocolDatabase distribution and LSA types explainedOSPF network structureAreasRouter typesOSPF neighbors and neighbor states (DR and BDR election)External Route Distribution methods (type1, type2)Interface cost and interface types (broadcast, NBMA, etc.)SPT calculation algorithmOSPF and multicast (problems with NBMA)Stub, NSSA and area ranges (route aggregation)Virtual links, usage and limitationsSPF routing filters and limitationsWhat is VPN?Different types of VPNSite to site connectivity with tunnelsIPIP, EoIP, PPTP, SSTP, L2TP, PPPoEVLAN and it's usageVLAN and managed switchVLAN and switch chip configuration on RouterBOARDsQ-in-Q implementationAs you can see, there are many topics that are covered in this course and on each of the topics there are sub-topics. A lot of LABS will be done on each of the topics so you can understand practically how you can configure all these topics on the MikroTik.Finally, if you want to have a global understanding of all MTCRE topics and be ready for the MTCRE exam, all you need to do is to register to my course and I assure that your goal will be achieved.
