|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/mikrotik-mlag-with-vlans-for-data-centers/
课程评论：没有评论
**课程名称：** MikroTik MLAG 与 VLAN 数据中心配置 **课程概述：** 本课程专注于讲解和实践 MikroTik 交换机强大的 Layer 2 功能，特别是 RouterOS v7 中引入的 MLAG (Multi-Chassing Link Aggregation Group) 技术。MLAG 允许将两台或多台交换机“虚拟化”为一台，从而在数据中心环境中实现高可用性。当一台交换机发生故障时，网络流量可自动切换到另一台交换机，确保网络连接的持续性。 课程将深入解释 MLAG 的原理，并结合数据中心实际应用，对 MLAG 和 VLAN 进行详细的配置。学员将使用两台 MikroTik CRS3xx 系列交换机进行实践操作，并最终通过测试验证 MLAG 的故障转移能力。 **课程亮点：** * **实战导向：** 课程内容高度贴近数据中心实际部署场景，以大量的实验室操作 (LABS) 为主。 * **核心技术讲解：** 深入剖析 MLAG 的概念、优势以及在数据中心的应用。 * **VLAN 集成：** 结合 VLAN 技术，全面提升网络隔离和管理能力。 * **高可用性实践：** 通过 MLAG 配置，实现数据中心网络的冗余和高可用性。 * **动手实践要求：** 学员需要准备至少两台 MikroTik CRS3xx 系列交换机和两台 Routerboards 以便跟随实验室练习。 **目标学员：** * 在数据中心环境中工作的网络工程师。 * 希望了解和掌握 MikroTik MLAG 技术的网络专业人士。 * 寻求提升数据中心网络可用性的技术人员。 **建议：** 强烈建议学员在家中重复课程中的实验室练习，以加深对 MLAG 配置的理解和熟练度。本课程将一步步带领学员完成 MLAG 的配置，确保学员能够全面掌握 MikroTik 交换机上的 MLAG 技术。
MikroTik switches are very powerful devices on working on Layer 2. Many Data Centers are using MikroTik switches in their environment and have a very high uptime for their customers.Since RouterOS v7, MikroTik has included a new feature on its switches which is MLAG (Multi-Chassing Link Aggregation Group). This feature is very much used in Switching data center environment allowing 2 or more switches to be seen as a virtual 1 switch. This would help that in case one of the switch goes down, then the network remains connected because the traffic will move to the 2nd switch. MLAG is a feature that is well known for many engineers working on Data Centers, and fortunately it is now available on MikroTik Switching environment using RouterOS v7,In this course, I will be running same setup as it is run on Data Centers. I will surely have to explain 1st about what MLAG is all about in details, then I will start doing the configuration. I will be using VLANS as well because all Data Centers run VLANS. The MLAG will be configured on 2 MikroTik CRS3xx series switches, and at the end we are going to make a test to check if the failover happens in case one of the switches go offline.The course will be based on LABS, and you are required to have at least 2 MikroTik CRS3xx switches and other 2 routerboards to be able to follow the LABS.It is highly recommended for any students to repeat the LABS at home so at the end he can understand how to configure MLAG on MikroTik Switches.Finally, if you wish to understand all about MLAG on MikroTik Switching, I advise to enroll in this course and I will go with you step by step to make this mission happens.
