|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/mikrotik-capsman-with-labs/
课程评论：没有评论
课程名称：MikroTik CAPsMAN与实验室 课程概述：在本课程中，您将学习如何在酒店、商场或展览等场所安装完整的无线网络，确保Wi-Fi覆盖整个区域，以便用户享受无线互联网连接。由于在这样的复杂网络中，通常需要配置数十到数百个无线接入点（AP）以实现全面覆盖，而逐一配置这些AP会耗费大量时间。因此，本课程将介绍如何使用MikroTik CAPsMAN从一个设备控制所有MikroTik AP，并通过CAPsMAN MikroTik路由器更改所有无线设置。 课程内容将包括： - 在CAPsMAN上的初始配置 - 使用或不使用证书将CAP连接到CAPsMAN - 在CAPsMAN中创建频道 - 在CAPsMAN中创建安全配置文件 - 在CAPsMAN中创建配置容器 - 在CAPsMAN中创建数据路径 - 在CAPsMAN中进行设备配置 - 配置CAPsMAN的VLAN - 创建访问列表 - 制作备份CAPsMAN以实现故障切换 MikroTik CAPsMAN的配置信息并不清晰，因此本课程将为您提供详细的参考和实验室实践，帮助您理解如何使MikroTik CAPsMAN正常工作。希望您能享受本课程的学习过程。
Many of you as network engineers have been requested to install a complete wireless network in a hotel, mall or exhibitions so the Wi-Fi covers the whole area to allow users to enjoy the wireless internet connectivity. In such a complex network, you require 10's and sometimes 100's of Wireless Access Points (APs) to provide the full coverage. Those APs require configuration to let them work, so if you have for example 100 APs to configure then you need to configure them one by one and this takes a lot of time.In our case, we can use MikroTik CAPsMAN so all MikroTik AP's can be controlled from one device and all settings on the Wireless can be changed from the CAPsMAN MikroTik Router - and this is the mission of this course.In this course, I will show you how you can connect all APs to the CAPsMAN and how you can control everything from the CAPsMAN itself. With a real LAB scenario, I will show you step by step how you can configure everything at the CAPsMAN then we will connect to the wireless and see that it is going to be working without any problem.Topics that will be covered in this course are:Initial Configuration on the CAPsMANConnect the CAPs to the CAPsMAN with and without certificatesCreate Channels in CAPsMANCreate Security profiles in CAPsMANCreate Configuration containers in the CAPsMANCreate Datapaths in CAPsMANMake Provisioning in the CAPsMANConfigure VLAN's on CAPsMANCreate Access listsMake a backup CAPsMAN for failoverMikroTik CAPsMAN is very required and information about how to configure it is not very clear, so this course can be like a reference for you to understand in details with LABS how to make MikroTik CAPsMAN works. I hope that you will enjoy my course.
