|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/microcontroller-programming/
课程评论：没有评论
课程名称：掌握微控制器编程 课程概述：如果您正在阅读微控制器编程的书籍，关注不同的博客，但仍然感到困惑，那么您来对地方了。本课程围绕最流行的8位ATmega328 AVR微控制器设计，将帮助您学习如何为ATmega328 MCU编写C程序。我们将通过高质量的内容使复杂概念变得易于理解，无论您是初学者还是已有基础，我相信您都能享受学习的过程。 课程简述：我们将从基础知识开始，探索微控制器，包括搭建官方的Atmel Studio7 IDE、安装编程工具以及以最简单的方式连接电路。在开始时，为了简化硬件部分的复杂性，我们将使用Arduino Uno上的ATmega328芯片，这将节省我们在硬件方面的时间，使我们能够更多地专注于AVR C编程中的核心微控制器特性。随着课程的深入，我们将使用ATmega328 Xplained Mini评估套件，学习高级调试技术。 本课程的主要目标是帮助您建立对微控制器架构及外设寄存器的深入理解，以便在编写专业嵌入式系统软件时能够有效应用。我们将从零开始搭建每个电路并编写微控制器固件，初期将花费足够的时间掌握基础知识，这将为长远的学习提供帮助，并增加您使用微控制器架构和C编程的信心。 接下来，我们将构建小型项目，使用LED、开关、模拟和数字传感器（温湿度/光强/距离传感器）、红外传感器、继电器等。这些项目虽小却强大，为使用GPIO、定时器/计数器、中断、PWM、ADC、串行UART等外围设备开发嵌入式软件和硬件打下坚实的基础。
If you're reading books of microcontroller programming, following different blogs and still feel stuck. Then you came to the right place, this microcontroller programming course designed around most popular 8-bit ATmega328 AVR Microcontroller. In this course, we will learn how to write C Programs for ATmega328 MCU. I've made complex concept easy to understand using quality content. It doesn't matter if you're new to microcontrollers or already know basics. I am sure you'll enjoy learning with this course.Short Description:We'll begin our journey to explore microcontroller right from the basics like setting-up official Atmel Studio7 IDE, installing programming utilities and hooking up the circuits in easiest way. To keep the hardware part simple in the beginning, we will use ATmega328 chip on Arduino Uno. Believe me this will save our time at hardware side so that we can focus more on core microcontroller features through AVR C Programming. Later on, as the time rolls on we will use ATmega328 Xplained Mini evaluation kit to learn advance debugging techniques."The Biggest objective of this course is to help you build sound understanding of microcontroller architecture and peripheral registers in-order to use them while writing professional embedded systems software"We will setup every circuit from scratch and write microcontroller firmware for it. We will spend enough time in the beginning to get basics right. This will save time in long run and make you feel confident working with Microcontroller Architecture and C Programming.Later on, we will be building mini projects to use LED, Switches, Analog and Digital Sensors (temperature/humidity/light Intensity/distance), IR Sensor, Relays and many more. These projects can be small yet very powerful to lay down strong foundation to use GPIO, Timer/Counter, Interrupt, PWM, ADC, Serial UART and other peripherals while developing embedded software and hardware.
