|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/maxsurfeducationenglish/
课程评论：没有评论
本课程全面介绍Maxsurf软件在船舶建模和计算中的应用，旨在帮助学员掌握从概念设计到最终稳定性计算的全过程。课程从Maxsurf软件的各个模块展开，包括Modeler、Stability、Resistance、Structure、VPP（帆船）和Motions。 **核心内容亮点：** * **实战项目驱动：** 课程以设计一艘完整的豪华游艇为案例，从零开始，详细演示如何创建优化的船体。 * **设计流程模拟：** 模拟了客户与设计办公室之间的沟通协作，强调根据客户需求和初步设计阶段的限制条件（如Spect Table）来确定船体参数。 * **关键计算详解：** 深入讲解并实操了船体阻力和续航力的计算，以及基于这些计算的油箱容量确定；同时涵盖了初步稳定性计算的理论与实践。 * **Rhino集成应用：** 课程强调Maxsurf与Rhino软件的配合使用。在Rhino部分，学员将学习结构建模、内饰设计、重量估算等Maxsurf未涵盖的关键环节，并通过重量信息进行最终的稳定性计算，得出可提交给船级社审批的详细报告。 * **运动与结构分析：** 详细解释了Motions模块，并对结果进行解读；利用Structure模块对Rhino中建模的结构进行分析，展现该模块的功能。 * **VPP模块实操：** 讲解了帆船VPP模块的设计和应用，包括相关操作。 * **理论与实践并重：** 不仅教授软件操作，更侧重于分析结果的解读和工程化思维的培养，强调理解分析结果的重要性，而非仅仅执行操作。 * **资源完整性：** 所有课程配套的模型文件均已上传，方便学员同步学习和实践。 * **入门友好：** 即使是相关领域初学者，也能通过本课程系统学习，最终具备独立设计和制造船只的能力。 本课程旨在培养学员的船体设计和工程分析能力，助其成为该领域的佼佼者。
Halil Necati KARACA Respectfully Presents, Welcome to our training, published worldwide for the first time on an online platform. Maxsurf is a software for hull modeling and calculations of boats. We recommend that you do not think that you can only learn Maxsurf with this training. Because you will learn so much more. Maxsurf consists packaged software designed to perform different operations. Modeler, Stability, Resistance, Structure, VPP (Sail) and Motions modules are explained. The new version of Maxsurf is used throughout the training. -During the training, Maxsurf software and all commands in the software were explained one by one. -After being shown everything the software could do, a Mega Yacht hull was designed from zero. An optimum hull has been created by taking all parameters into consideration. -Everything that needs to be done to obtain a perfect boat hull is explained. -The relationship between the customer and the design office was simulated in the training. Mega Yacht is completely determined according to the customer's wishes. All limitations and values were determined by creating a Spect Table at the preliminary design stage. -Resistance and range calculations of the boat have been made. Tank capacities were decided according to these calculations. -Preliminary stability calculations have been made. All calculations that can be made with the software are explained both theoretically and practically. -With the help of the data obtained, revisions were made and the boat was made ready for superstructure design. -In Maxsurf, weight and center of gravity information is needed to calculate the final stability. At this stage, the process continues with Rhino training. -In the Rhino course, all design, construction, interior modeling and weight calculation issues are explained in detail and modeling procedures are also carried out. -The positions of the tanks were decided with the help of the weight information obtained in the Rhino traning. Then, Final Stability calculations were made. The calculations are listed in the Final Stability Booklet at a level that can be sent to Lloyd Register for approval. -The subject of Motions is explained using the same Mega Yacht. All the details are mentioned and the results are interpreted. -With the help of the Structure Module, an effort has been made to model the same construction modeled in Rhino, and all the operations that the software can perform are explained. -The sail of the sailboat used in our VPP module Scantling course is designed and explained. All operations that the software can perform are mentioned. All model files have been uploaded to the resources section at the end of the lessons. In this way, it is aimed that you progress simultaneously with the training and reach 100% efficiency. An attempt has been made to explain everything as simply as possible. Even if you have no knowledge in the fields mentioned, you can learn all of them. When you complete the training, you will be able to design and manufacture your own boats on your own. This will help you be among the pioneers in this field. Maxsurf is an analysis program and the important thing in analysis programs is to interpret the analysis rather than making the analysis. This requires sufficient knowledge and experience. The important thing is not to learn the software. Learning software alone will not save you any money. A high school student can also perform analysis using the software. That's why the results obtained from the software are explained meticulously in this training. The important thing is to abandon the programmer way of thinking and focus on the result with an engineering approach. Only then will you realize that you can actually use Maxsurf. Maxsurf is not a program that can be used in all design stages. For this reason, the same boat prepared during Maxsurf training was also used in Rhino training. With the help of Rhino software, you will be able to learn all the design and technical details that cannot be implemented with Maxsurf software. Thanks to these two trainings, you will be able to add professionalism to your professionalism in both engineering and design and be one of the best in this world.
