|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/machinery-vibration-analysis-cat-ii/
课程评论：没有评论
课程名称：机械振动分析 概述：本课程旨在为寻求以振动分析为基础的预测性维护入门知识的人员提供指导。完成课程后，学习者将能够为数据采集器进行适当的设置，从旋转机械中收集良好的振动数据，理解振动信号的基本知识，并分析信号（如时间波形、频谱和相位），以识别旋转机械中的各种机械和电气故障。 主要内容： - 维护程序类型 - 振动基础知识 - 振动单位国际标准化组织（ISO） - 过程中的机器分类 - 振动传感器 - 振动测量概念 - 振动评估ISO标准 - 数据收集理解 - 信号处理与分析 - 机械故障诊断：如不平衡、轴错位、弯曲轴、轴承倾斜、结构松动、轴承缺陷、齿轮箱缺陷、泵汽蚀、皮带轮缺陷和皮带损坏 - 电气故障诊断：如破损的转子条、转子偏心和定子偏心 - 工业真实案例研究 适合对象：本课程适合维护、检查、运营和生产工程师，旨在逐步提升学习者的知识水平，从初学者成长为能够诊断旋转机械中不同机械和电气故障的振动分析师。 讲师介绍：课程由Wael Salman博士授课。其资历如下： - 旋转机械条件监测领域的博士学位 - 动力学与振动，机械工程学院，许布拉，贝哈大学 - 固体力学硕士学位 - 动力学与振动，航空与机械工程学院，开罗大学 - 费尤姆大学机械与航空工程学院助理教授 - 澳大利亚Mobius振动分析讲师 - 埃及民航局（ECAA）批准的维护讲师，在埃及航空学院任教 - 埃及武装部队批准的维护讲师，在空军学院任教 - Mobius认证讲师，教授振动分析课程（Cat I, Cat II, Cat III） - ISO III类认证振动分析师 - Mobius学院认证 课程内容全面，适合希望深入了解机械振动分析及其应用的工程师。
This course is prepared for persons who are looking for the first step in the field of predictive maintenance based on vibration analysis and reaching the knowledge of vibration analysis at the end of this course. You will be able to perform a proper setup for data collector, collect good vibration data from rotating machines, understand the basics of vibration signals, and analyze vibration signals such as time waveform, spectrum, and phase to detect the different mechanical and electrical faults in rotary machines. Main Contents:Types of Maintenance ProgramsFundamentals of VibrationVibration Units ISOMachine Categories in Process PlantVibration TransducersConcept of Vibration MeasurementVibration Evaluation ISO StandardsUnderstanding Data CollectionSignal ProcessingSignal AnalysisMechanical Fault Diagnosis such as Unbalance, Shaft misalignment, Bent shaft, Cocked bearings, Structural looseness, Bearings defects, Gearbox defects, Pump cavitation, Pulley defects and Belt damage.Electrical Fault Diagnosis such asBroken rotor bar, Rotor eccentricity, and Stator eccentricity.Real case studies from industriesWho Could attend?This course is prepared for maintenance, inspection, operation, and production Engineers. It was prepared to gradually increase the knowledge of this person from a beginner to advanced level to be a vibration analyst and diagnose different mechanical and electrical faults that are early initiated in the rotary machines.Dr. Wael Salman is the Instructor for Machinery Vibration Analysis Course. His qualifications are:- PhD degree in Condition Monitoring of Rotating Machines - Dynamics and Vibrations, Faculty of Mechanical Engineering, Shoubra, Benha University- Master degree in Solid Mechanics - Dynamics and Vibrations, Faculty of Aerospace and Mechanical Engineering, Cairo University- Assistant Professor at Faculty of Mechanical and Aerospace Engineering, Fayoum University- Mobius Vibration Analysis Instructor, Australia- Approved Maintenance Instructor (from Egyptian Civil Aviation Authority, ECAA) at Egyptian Aviation Academy- Approved Maintenance Instructor (from Egyptian Armed Forces) at Air Academy- Mobius Instructor Approval for teaching vibration analysis courses (Cat I, Cat II, Cat III)- Certified Vibration Analyst - ISO Category III- Mobius Institute
