|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/learn-modeling-tactics-and-tools-for-3d-printing/
课程评论：没有评论
课程名称：使用Blender 3D和Netfabb学习3D打印建模 课程概述：本课程适合所有对3D打印感兴趣但缺乏3D建模软件经验的人。我们将从头开始教授3D打印建模，帮助您掌握如何将设计转化为可打印的3D模型。课程将详细介绍如何准备3D模型以适应打印，包括设置实际尺寸（毫米、英寸、厘米或英尺）、确保模型密闭、提供壁厚、去除非流形面和重叠面等步骤。同时，您还将学习如何将模型导出为3D打印机接受的文件格式。课程还介绍如何在如Shapeways、Thingiverse、Sculpteo等3D打印市场出售您的模型，并为您创造现金流，而上传模型后只需最少的关注和时间。 本课程的最大优点是，无需购买昂贵的3D建模软件，您将接触到一些非常流行且强大的开源3D建模和打印软件，如Blender 3D和Netfabb。课程不会浪费时间在冗长繁琐的建模过程中，而是利用丰富的快捷技巧、命令和内置工具，以精准和高效的方式获得理想结果。在仅1.5小时的讲座中，您将获得我8年3D建模经验的核心精华，以及我在此期间学到的技巧和工具。如果您在设计过程中遇到困难，我也会提供支持。
This course is for all those who have heard a lot about 3d printing, but often wondered on how can they without any earlier experience of working on 3d modeling software's, can really take these tools in their own hands to 3D model & print their designs. You will learn modeling for 3d printing from scratch to finish, this in not any other 3d modeling course which will just give you an idea about how 3d modeling is done. And then leave you midway without actually demonstrating on how to prepare a 3d model for 3d printing Preparing a 3D model for 3D printing has many basic prerequisites like Setting the model to real world dimensions in mm, inches, cm or ft Making sure the model is water tight, providing wall thickness, removing of non manifold faces, overlapping faces , etc. Exporting the model in a file format which is accepted by 3d printers You will learn all these steps, in addition this course will also show you how to print and sell your models in 3d printing market places like shapeways, thingiverse, sculpteo, and make them a source of cash flow, requiring your minimum attention & time once you are done with uploading your models. The best benefit of this course is that you will learn all this without any need of buying a costly 3d modelling software. You will see me using some very popular and powerful open source, 3d modelling & printing software's like Blender 3D, Netfabb. No lengthy & tiring 3D modeling sessions, when there are abundant tricks, commands, & inbuilt software tools to get our desired results with precision accuracy and tiny fraction of time. Using every tool at our disposal to best of our advantage, creating your first 3d printable design in less than 5 minutes. In 1.5 hours of lectures you will gain the core syrup of my 8 years of experience in 3D modeling, and the tricks & tools i have learnt over this period. If you take this course, i will also offer you support if you get stuck somewhere in designing your models for 3d print.
