|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/learn-basics-of-allen-bradley-micro-logix-plc-in-15-hours/
课程评论：没有评论
**Coursera 课程总结：Allen Bradley MicroLogix PLC 编程基础** 本课程旨在教授学员 Allen Bradley MicroLogix PLC 的基础编程知识。通过本课程，您可以在短时间内从零开始学习 MicroLogix 的逻辑设计。课程无需硬件设备，只需在个人电脑上安装 MicroLogix 软件即可进行学习。课程将循序渐进地涵盖 MicroLogix 的基本编程概念，包括视频讲解和实践练习。 **课程大纲：** 1. **继电器逻辑基础** 2. **Allen Bradley MicroLogix 简介** * PLC 框图 * PLC 输入和输出 * PLC 工作原理 * PLC 通信协议 * PLC 接线 * 漏型/源型 * NPN & PNP 传感器 3. **下载和安装 MicroLogix 500 软件** 4. **MicroLogix 500 软件基础及 PLC 通信** * PLC 规格 * 软件界面 * 如何创建标签 (Tag) * 在模拟器中创建第一个程序 * 通信设置 * 如何在线监控程序 * 如何将程序加载到模拟器 * 如何建立以太网连接与 PLC 并加载程序 5. **基本参数** * 常开触点 (Normally Open Contact) * 常闭触点 (Normally Close Contact) * 输出线圈 (Output Coil) * 串联 - 与逻辑 (Series-AND Logic) * 并联 - 或逻辑 (Parallel-OR Logic) * 并联 - 非与逻辑 (Parallel-NAND Logic) * 串联 - 非或逻辑 (Series-NOR Logic) * 练习 1 6. **通用内部存储器** 7. **锁存 (Latching)** * 输出锁存 * 使用 Latch 和 Unlatch 命令进行锁存 8. **定时器 (Timers)** * 通电延时定时器 (On Delay Timer) * 定时器使能 * 指定延时时间 * 复位定时器 * 断电延时定时器 (Off-Delay Timer) * 带保持功能的通电延时定时器 (Retentive On-Delay Timer) * 练习 2 9. **计数器 (Counters)** * 加计数器 (Up Counter) * 复位计数器 * 减计数器 (Down Counter) * 加减计数器 (Up-Down-Counters) * 练习 3 10. **算术运算及 MOVE 指令** * 加法 (Addition) * 减法 (Subtraction) * 乘法 (Multiplication) * 除法 (Division) * 移动操作数 (Moving Operands) * 移动常量 (Moving Constants) * 练习 4 11. **比较器运算** * 等于 (=) * 小于 (<) * 大于 (>) 本课程将带领您全面掌握 Allen Bradley MicroLogix PLC 的编程基础，为进一步学习和应用打下坚实的基础。
This is a comprehensive course for learning the basic level programing of Allen Bradley PLC in Micro Logix software. You will learn the logic designing of Micro Logix from scratch in a short period. No hardware equipment will be required to follow the course you will just have to install Micro Logix software on you PC and you can do it. Fundamental programming of Micro Logix will be covered step by step including the video lectures, assignments.Couse Outline:1- Introduction of Relay Logic2- Introduction of Relay Logic3- Introduction to Allen Bradley Micro Logix • PLC Block Diagram • PLC Inputs and Outputs • Working Principle of PLC • PLC Communication Protocols • PLC Wiring • Sink/Source • NPN & PNP Sensors4- Download and Install Micro Logix 500 Software5- Basics of Micro Logix 500 Software and Communication with PLC • PLC Specification • Software Interface • How to Create Tags • Making First Program on Simulator • Setting up Communication • How to Monitor the Program Online • How to Load Program in Simulator • How to Build Ethernet Connection with PLC and Load Program6- Basic Parameters • Normally Open Contact • Normally Close Contact • Output Coil • Series-AND Logic • Parallel-OR Logic • Parallel-NAND Logic • Series-NOR Logic • Assignment_17- General Internal Memories8- Latching • Latching with Output • Latching using Latch and Unlatch Command9- Timers • On Delay Timer • Enable of Timer • Specifying the Duration of Time • Resetting a Timer • Off-Delay Timer • Retentive On-Delay Timer • Assignment_210- Counters • Up Counter • Resetting a Counter • Down Counter • Up-Down-Counters • Assignment_311- Arithmetic Operations and MOVE Command • Addition • Subtraction • Multiplication • Division • Moving Operands • Moving Constants • Assignment_412- Comparator operations • Equal (=) • Less Than (>) • Greater Than (
