|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/juniper-routing-all-in-1-video-bootcamp/
课程评论：没有评论
**Juniper 路由全能视频训练营课程总结** 本课程旨在帮助网络工程师深入理解路由原理，并熟练掌握在 Juniper 路由器上进行路由配置。课程结合理论与实践，通过大量的实验操作，教授学员配置各种路由类型，包括静态路由、默认路由、浮动路由，尤其是 OSPF 动态路由协议。 **课程内容概览：** **第一部分：路由基础理论与静态路由** * **路由基础：** * 解释路由的必要性 * 静态路由与动态路由的对比 * 路由表与转发表的区别 * 路由表与转发表的实践操作 * **静态路由配置：** * 静态路由的配置方法 * 路由优先级（Preference）的概念 * **路由策略：** * 路由实例（Routing Instance） * 导入、导出和默认路由策略 * 路由策略结构解析 **第二部分：OSPF 动态路由协议详解** * **OSPF 理论：** * 链路状态（Link State）理论 * OSPF Hello 数据包 * DR (Designated Router) 与 BDR (Backup Designated Router) * **OSPF 高级配置与应用：** * OSPF 多区域（Multi-area OSPF） * OSPF 被动接口（Passive Interface） * OSPF 虚拟链路（Virtual Link） * OSPF 路由聚合（Route Aggregation） * OSPF 默认路由引入（Default Originate） * OSPF LSA 类型详解 * OSPF खूप（Stub）区域 **课程价值：** 本课程超过 60% 的内容将聚焦于 OSPF，这是目前最广泛使用的动态路由协议。通过本训练营的学习，学员将能够自信地在 Juniper 网络环境中配置和管理路由，从而提升网络工程师的专业技能。课程承诺，完成训练营后，学员将能轻松配置网络中的路由。
Routing is needed is every network. That's why, we, as network engineers, should understand routing well to be able to configure it correctly in our network.A lot of companies used Juniper as their main routers in their networks, that's why I have decided to make a course speaking about routing in general in Juniper and show you with LABS how to configure routing on Juniper routers. This course will include theoretical part as well as a practical part. That means we are going to configure routing on Juniper routers and make them work. Something like static routes, default routes, floating routes and most importantly OSPF. More than 60% of this course will be based on OSPF which is the most used dynamic routing protocol in every networks nowadays. In the 1st part of this bootcamp I will speak about:Why we need routingStatic Route vs Dynamic RouteRouting versus forwarding tableRouting and forwarding table LABStatic routingRoute preferenceRouting instancesImport Export and Default routing policiesUnderstand the structure of the routing policiesin the 2nd part of this course, I will speak about:Link state theoryOSPF Hello packetOSPF DR & BDRMulti-area on OSPFOSPF Passive interfaceOSPF Virtual linkOSPF Route AggregationOSPF Default originateOSPF LSA typesOSPF Stub areasFinally, if you wish to master routing on Juniper, I advice to buy this video bootcamp and I guarantee you that after finishing this course you will be able easily to configure routing in your network.
