|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/juniper-basics/
课程评论：没有评论
**课程名称：** Juniper基础 **课程概述：** 本课程旨在帮助学习者掌握Juniper设备的基础配置和操作。课程从理论知识开始，逐步深入到实际操作，包括接口配置、区域设置、策略路由、路由协议配置等。所有操作均在Juniper命令行界面（JUNOS）下进行。 **课程亮点：** * **实操性强：** 课程大量采用真实的Juniper设备进行演示，并有充足的命令行配置实践环节，让学习者亲身感受Juniper设备的强大功能。 * **循序渐进：** 从基础概念到复杂的路由配置，课程设计循序渐进，确保学习者能够逐步掌握JUNOS的命令行操作。 * **高性价比：** 学习者将能够熟练配置IP地址、设置区域、允许流量、静态路由、路由协议以及路由过滤等关键功能。 * **注重实践：** 课程强调实践的重要性，鼓励学习者投入时间进行练习，以达到熟练掌握JUNOS的目的。 * **目标明确：** 课程致力于让学习者在完成课程后，具备独立配置Juniper设备的能力。 **先修知识要求：** 学习本课程需要具备以下网络基础知识： * 网络基础 * IP地址分配 * TCP/IP协议 * OSI模型 * 两台主机之间的基本通信 **请注意：** 本课程仍在进行中，未来将持续更新，增加更多内容，例如RIP视频之外的其他内容。
First of all I want to state that this course is still in Progress. I will be adding on to this course beyond the RIP video. So hang in there.This is a course that starts off with some theory and then flows right in some fun. Configuring interfaces, setting up zones, filter routes, and setting up routing protocols. All of this is done on the Juniper command line. You are about to walk into a world which Juniper is no stranger to providing a powerful operating system that make their devices provide granular or simple tasks.By the time you are finished with this course, you will have the skills to be comfortable on JUNOS. But this does not happen over night. It takes practice and you need to spend the time practicing. I have taken the time to provide you with a course that helps you get familiar with the command line. I will be using real Juniper equipment with my lectures and there is a lots of time spent on the command line. That is correct, you will be seeing a lot of configurations. Lets face it, that is why you are here. You will learn how to configure IP addresses, set up zones, allow traffic into and between zones, static routing, routing protocols, route filtering, and so on. You can take for granted that you will find this course relaxing and a joy to follow. There is some boring things in the beginning, but when we start configuring, it just keeps going and going. Juniper is usually a device that others start with after having experience with other networking vendors. So you will need the basic skills in Network Fundamentals, IP addressing, TCP/IP, OSI Model, and Basic Communicated between two host. This is a course that is designed for one purpose.....To leave the course and gain the ability to configure a Juniper device. That is my goal and that is the mission of this course.
