|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/hvac-commissioning-2-fat-sat/
课程评论：没有评论
课程名称：HVAC 调试 2 - FAT / SAT 课程概述：调试是项目中一项至关重要的程序，但由于其依赖于项目及最终用户的标准，往往难以理解。例如，我在卡塔尔的EPC项目中进行了HVAC系统的性能测试，但在阿联酋的EPC项目中则没有。此外，对于在大学主修机械工程的工程师而言，处理自动控制系统也是一项挑战。通常情况下，控制面板（CP）在FAT（出厂验收测试）或SAT（现场验收测试）期间需要检查大量组件。基于这些原因，我希望设立这门课程，向大家展示HVAC工业项目中的典型FAT和SAT。如果你需要参与HVAC项目的FAT或SAT，这门课程将为你提供必要的理解。课程中包含了尽可能多的活动，以适应不同的情况并提供丰富的信息。 我们将讨论以下活动： - 介绍 - AHU（空气处理单元）、ACCU（空气冷却单元）与CP（控制面板）的外观 - CP的涂漆 - CP的配置 - CP电源线 - CP上电 - 输入/输出点检查 - 功能测试 - SAT（现场验收测试） 通过此课程，你将了解在FAT或SAT期间需要进行的各种活动。这门课程是根据我在中东地区参与的四个EPC项目的经验而制作的。希望你能通过这门课程对HVAC有更深入的理解。祝你好运！
Commissioning is one of the critical procedures for the project. It is not easy to understand because it depends on the project and end-user standards. For example, I did the performance test for the HVAC system when I worked for an EPC project in Qatar. But I didn't do it when I handled an EPC project in UAE.Furthermore, it is difficult for engineers who have majored mechanical engineering in their colleges to deal with automatic control systems. Generally speaking, a control panel (CP) has lots of components to check during the FAT or SAT.These are the main reasons for me to desire to make this course. I will show you the typical FAT and SAT for the HVAC industrial projects. If you need to deal with a FAT or SAT for the HVAC projects, you can understand about it with this course. You can use this course according to the situation since I put activities as many as possible into this course to contain as much as information.We will discuss about the below activities.· Introduction· AHU, ACCU & CP Appearance· CP Painting· CP Configuration· CP Power Cable· CP Power On· I/O Point Check· Function Test· SATFrom this course, you will get ideas about what kinds of activities shall be done during the FAT or SAT. For your information, I have made this course according to my experiences I got while working for 4 EPC projects in Middle East.I hope you would understand about the HVAC more with this course.Good luck.
