|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/huawei-advanced-bgp-with-labs/
课程评论：没有评论
课程名称：华为高级BGP与实验室 课程概述：BGP（边界网关协议）是互联网的核心路由协议，因此掌握它至关重要。在我发布的第一门华为BGP课程“华为BGP路由协议与实验室 - 入门”后，我决定制作这门课程，全面覆盖华为的BGP相关主题。因此，参加本课程的前提是您必须已经完成我的第一门华为BGP课程。本课程将重点讲解BGP的高级主题，包括多宿主负载均衡与故障转移、BGP社区、BGP汇聚、BGP路由反射器、BGP联盟等。这些都是您可以在实际中应用的高级主题。课程将先讲解理论部分，随后进行实验室操作。在实验室环节，我将使用华为的eNSP仿真软件模拟所有华为路由器以运行BGP路由协议。您不需要实际硬件即可完成本课程，但请注意，我无法分享华为eNSP仿真软件。希望您能注册我的课程，如有任何问题，请随时给我发消息，我会尽快回复您。
BGP is the routing protocol of the internet, that's why it is a very important protocol to know about it.After I have publish the 1st course of BGP on Huawei which is "BGP Routing Protocol on Huawei with LABS - Entry", then I have decided to make this course which complete the whole BGP topics on Huawei.Saying this, in order to follow this course you should have already taken my first Huawei BGP course.In this course, I will focus on the advanced topics that you can see on BGP. Think of Multihomed Load Balancing and Failover, BGP Community, BGP aggregation, BGP Route Reflector, BGP Confederation and so forth.All of those are advanced topics that you can use them in BGP.This could will explain the theoretical part then will be following with LABS. On the LABS, I will be using Huawei eNSP simulation software to simulate all the Huawei routers to run BGP routing protocol. You don't require physical hardware to follow this course in case you have eNSP simulation software.Please do not ask me to share with you the Huawei eNSP simulation software because I am not able to do so.I hope you will register to my course, and if you have any question(s) you can just send me a message and I will get back to you ASAP.
