|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/hmi_panelview_800_programming/
课程评论：没有评论
**课程名称：** HMI Panelview 800 配置与编程 **课程概述：** 本课程旨在帮助学员熟悉 Panelview 人机界面 (HMI)，并学会如何将其与 Micro 850 PLC 进行配置、接线和编程。HMI 在工业和制造业中用于控制和监控生产过程，使操作员能够观察流程并随时进行调整。 **学完本课程后，学员将能够：** * 配置 HMI 以便与 PLC 进行通信。 * 为 HMI 添加必要的电源和通信接线。 * 设计和编程输入设备。 * 设计和编程输出设备。 * 安装启动/停止电机控制站。 * 编程并连接用于正反向操作的电器联锁电路。 * 编程并连接定时器以在 HMI 上监控时间。 * 编程并连接计数器以在 HMI 上监控计数值。 * 编程并连接比较指令，如等于、不等于、大于、小于、组合比较以及最小值和最大值参数。 * 编程并连接数学运算。 * 在需要更多空间时添加各种屏幕。 * 调整字体样式、大小、颜色、背景颜色以及文本。 **先修知识建议：** 学员应具备可编程逻辑控制器 (PLC) 和基础电学的知识。同时，应具备良好的计算机操作能力，熟悉剪切、复制、粘贴等基本操作。
This course will allow students to become familiar with a Panelview human machine interface (HMI). Student will learn how to configure, wire, and program in concert with the Micro 850 PLC. HMIs are used in industry and manufacturing to control and monitor processes. It gives an operator an oportunity to observe these processes, and make changes whenever necessary. After this course the students will be able to:1. Configure the HMI to communicate with the PLC2. Add the necessary wiring to the HMI, both power, and communication connections3. Design and program an input device4. Design and program an output device5. Install a start/stop motor control station6. Program and connect an electrical interlock circuit for forward and reverse operation7. Program and connect a timer to monitor time on the HMI8. Program and connect a counter to monitor the count values on the HMI9. Program and connect compare instructions like equal, not equal, greater than, less than, a combination of these, and minimum and maximum parameters10. Program and connect math operations11. Add a variety of screens when more space is needed12. Manipulate font styles, sizes, and colors bachground colors, and minulipulate textThe students should have a background in programmable logical controllers and basic electricity. The students should have good computer skills and know how to cut, copy, paste, etc.
