|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/high-speed-serial-links/
课程评论：没有评论
**课程名称：** 高速串行链路电路设计 **课程概述：** 本课程旨在介绍高速串行链路（SERDES）的设计及其面临的挑战，特别适合有志于从事相关领域的本科生、研究生以及希望巩固基础知识的模拟和高速设计工程师。 随着信息技术的飞速发展，芯片之间大量数据的传输需求日益增长。然而，片上系统的输入输出（I/O）引脚数量有限，因此，采用高速串行链路进行数据串并转换（SERDES）成为实现高速数据传输的关键技术。串行通信不仅应用于短距离的芯片到芯片（C2C）通信，也广泛用于长距离的机器到机器（M2M）通信。智能手机等设备中就集成了多个SERDES。 本课程将深入探讨： 1. **高速串行链路/SERDES的需求与意义** 2. **SERDES的架构选择与原理** 3. **传输通道对数据速率的影响** 4. **信号均衡的需求及解决方案** 5. **连续时间线性均衡（CTLE）** 6. **高速串行链路关键模块概览** 7. **基于PLL和DLL的时钟技术** 通过本课程的学习，学员将能够理解高速串行链路设计的核心概念，为进一步的深入研究和实践打下坚实基础。
NOTE: New content added on Equalizer - CTLEIn high-speed communication applications , a large amount of data may have to be communicated from one chip to another. Unfortunately, the number of input and output (I/O) pins is limited on a System-on-Chip (SoC). Serializing and deserializing (also called "SerDes") the data using a serial link between the chips at a high speed is the way to achieve high speed data transfers. The data transfers can happen in short and long distances. The architecture of the design depends not only on the distance, but also on the speed of transfer (frequency of operation). Serial communication is used in machine to machine (M2M) and chip-to-chip (C2C) communications greatly. In fact, each smart phone in our hands has multiple such SerDes in it. In this course we will discuss the overview and the challenges of designing high speed SerDes. This course is specially curated and designed for freshers from the undergraduate and post graduate degrees. This course can act a refresher to experienced analog IC design engineers and high speed design engineers too. The topics you will address in this course are:1. Need for High Speed Serial Links / SERDES2. Architecture of SERDES - How to choose the architecture3. Impact of the Channel and its dependence of data rates4. Need for Signal Equalization and how it is solved.5. CTLE Continuous Time Linear Equalization6. A quick overview of the Major blocks of high speed serial links.7. Clocking using PLL and DLL
