|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/hands-on-ab-programmable-logic-controller-automation-fund/
课程评论：没有评论
课程名称：PLC -AB 可编程逻辑控制器自动化基础 课程概述：本课程提供了针对AB可编程逻辑控制器（PLC）自动化基础的实操培训，由Eman Kamel博士主讲。课程使用LogixPro 500版本，涵盖PLC自动化的各个方面。课程中包括录制的实践讲座视频示例，学员可通过观看模块11和模块29进行了解。本在线培训课程可作为Eman Kamel和Khaled Kamel合著的教材《Hands-On PLC Programming with RSLogix 500 and LogixPro》的补充资料。 课程目标： - 理解过程控制的基本概念。 - 了解PLC硬件和内存架构。 - 认识硬接线与PLC控制系统的特点。 - 实际应用中进行梯形图编程的动手实践。 - 在实时过程控制应用中使用计时器和计数器。 - 理解PLC仪器和HMI接口的应用。 - 能够使用和支持CompactLogix、MicroLogix、RSLogix 500/5000及SLC-500/5000。 - 能进行过程控制的设计与故障排除。 - 使用LogixPro 500和PLCLogix 500/5000仿真软件进行实践。 课程内容： - 42个模块，共60节课程，包含44节录制讲座，9个PLC编码项目作业及2个顶尖项目，提供超过50个工业过程控制梯形图程序。 - 可免费观看的模块包括模块1、模块11和模块29。 - 完成前23个模块是掌握PLC梯形图编程的必修课，后续模块包括高级PLC过程控制工业应用。 - 每个模块包含逐步录制、相关的MS Word文档及完全调试过的梯形逻辑程序实现。 课程要求： - 熟悉PC文件系统和Windows环境。 - 具备数字逻辑设计的基础知识。 - 推荐使用 LogixPro 500或PLCLogix 500/5000进行编程与仿真。 作者及课程介绍： PLC自动化是一家小型企业，总部设在德克萨斯州Manvel和肯塔基州路易斯维尔。我们专注于基于PLC的过程控制与自动化，创始人Eman Kamel博士和Khaled Kamel博士在PLC软件开发和各种工业应用的定制培训方面拥有超过50年的经验。我们与McGraw-Hill出版社合作，出版了在Rockwell Allen Bradley和西门子基础架构领域的行业领先教材。 课程受众： - 工程/技术学院讲师。 - 寻求PLC培训的学生和初学者。 - 控制/仪器工程师/技术员。 - 过程工程师（电气、化工、机械等）。 - 维护和工业自动化专业人士。
Hands-On AB Programmable Logic Controller Automation Fundamentals.LogixPro 500 Version, PLC Automation, Eman Kamel, Ph. D.Please view Module 11 and Module 29 as an example of the recorded hands on lecture videoes included in this course.This standalone online PLC training course can be used as a supplement to the following author's published textbook:Eman Kamel and Khaled Kamel, "Hands-On PLC Programming with RSLogix 500 and LogixPro", McGrew-Hill professional, (ISBN-13: 978-1259644344), August 2016. Course Objectives· Understand concepts of process control.· Understand PLC hardware and memory architecture.· Realize the characteristic of hardwired and PLC control systems.· Ladder logic programming hands-on with real industrial applications.· Use of Timers / Counters in real time process control applications.· Understand PLC instrumentation and HMI interfaces.· Be able to use and support CompactLogix, MicroLogix, RSLogix 500/5000, and SLC-500/5000.· Be able to perform process control design and troubleshooting.· Hands-on with LogixPro 500 and PLCLogix 500/5000 simulations software.Course Content42 Modules - 60 lectures, 44 lectures recording, 9 PLC coding projects assignments including 2 capstone projects, and over 50 industrial process control ladder programs. Free preview for Module 1, Module 11, and Module 29. Completion of the first 23 Modules are must for mastering PLC ladder programming. Remaining Modules include advanced PLC process control industrial applications.Each Module contains step by step recording, associated MS Word documentation files, and fully debugged ladder logic program implementation.Module 01- Hardwired Relay control and the PLC evolution.Module 02- PLC Fundamentals; hardware and programming basics.Module 03- Combinational logic and introduction to LogixPro simulation software.Module 04- Maser Control Relay (MCR) and logic diagrams.Module 05- Process control fundamentals.Module 06- Motor control, XIC, XIO, Latch, and Unlatch instructions.Module 07- OSR, Latch, Unlatch Motor start / stop applications.Module 08- Batch process control structured programming; Motors, Heater, and Mixer.Module 09- Bit and Word combinational ladder logic implementation.Module 10- Bit Shift Left (BSL) instruction and sequence control application.Module 11- ON Delay (TON) Timer control and operation.Module 12- TON applications; Mary Go Round, cascading, and recycling.Module 13- Motor Fail to Start and Gate manipulation in irrigation control application.Module 14- OFF Delay (TOF) timers, Count UP (CTU), and Count Down (CTD) applications.Module 15- Retentive Timer (RTO) operation and Pump station scheduling application.Module 16- Count Up and Down ladder application.Module 17- Math and Move instructions ladder application.Module 18- Light control using one Normally Open (NO) Push Button (PB).Module 19- Schmitt Trigger control application.Module 20- Mary Go Round one timer ladder control implementation.Module 21- Batch Process Control sequence implementation.Module 22- One Way Traffic Lights control.Module 23- BCD user interface ladder implementation; FRD and TOD instructions.Module 24- BCD Input / Output control application.Module 25- Big- and Little-Endian swap implementation.Module 26- Analog signal counts and scaling options implementation.Module 27- Tank fill and drain application.Module 28- Garage door reversible motor control.Module 29- Silo process control application implementation.Module 30- Two One Way crossing traffic lights control implementation.Module 31- Three Pumps Batch process control implementation.Module 32- BCD Interface temperature conversion application.Module 33- Tank Pressure Control using one compressor.Module 34- Tank Pressure Control using dual compressors.Module 35- Bottle Assembly process control; large, small, and scrap.Module 36- Two Floors (1 and 4) Elevator control.Module 37- Four Floors Elevator control using structured programming.Module 38- Process Control Design Fundamentals.Module 39- Ladder Program Debugging 1 and 2.Module 40- Ladder Program Documentation.Module 41- Irrigation Canal Downstream Water Level Control, Project 1.Module 42- Wastewater Treatment Pumping Station Control, Project 2.Requirements· Working familiarity with PC file system and windows environment.· Basic Knowledge of Digital Logic Design.· Any PLC software for Programming and Simulation; LogixPro 500 or PLCLogix 500/5000 is recommended.Authors and Course DescriptionPLC Automation is a small business with offices in Manvel, Texas and Louisville, Kentucky. We are focused on PLC based process control and automation. The two principles of our business (Drs. Eman Kamel and Khaled Kamel) have a combined 50 years of experience in PLC software development and customized training in a variety of industrial applications including flexible manufacturing automation, chemical process control, wastewater treatment, and utilities process control. We also published with McGraw Hills industry leading textbooks in PLC process control for the Rockwell Allen Bradley and the Siemens infrastructures.The PLC Automation online training consists of six sections, each having an average of ten modules. The training is designed for the LogixPro 500 or the PLCLogix 5000 simulation software but can be used with other AB compatible PLC development software. All modules' programs, documentation, and hands-on recordings are implemented for both the Allen Bradley RSLogix 500 and RSLogix 5000. Completion of this course will enable students to master the concepts of PLC process control; design, implementation, trouble shooting, and technical documentation.Course Audience· Engineering / Technical Colleges Instructors.· Students and Beginners seeking PLC training.· Control / Instrumentation Engineers / Technicians.· Process Engineers; Electrical, Chemical, Mechanical, and others.· Maintenance and Industrial Automation Professionals.
