|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/glass-beads-wig-wag-cane/
课程评论：没有评论
**课程名称：** 玻璃珠 103.4 - 卷曲纹彩色玻璃棒 **课程概述：** 本课程专为初学者设计，教授如何制作具有标志性颜色波浪纹的卷曲纹彩色玻璃棒。课程无需大量经验或昂贵的工具和材料。 **课程内容：** 1. **课程介绍与教学大纲演示：** 了解课程整体规划。 2. **前提知识回顾：** * 基础热玻璃安全要求。 * 通风良好的工作区域。 * 迪迪米姆（Didymium）安全眼镜。 * **建议：** 拥有烤箱，以便对制作的玻璃棒进行妥善退火。 3. **制作第一个卷曲纹彩色玻璃棒：** * **基底制作：** 在 1/8 英寸的芯棒上制作一个圆柱形基底。使用透明玻璃作为核心，增加硬度便于制作。 * **颜色层：** 在透明玻璃核心上覆盖一层不透明的白色玻璃。 * **线条绘制与第一次扭转：** * 使用黑色细玻璃棒（stringer）在基底圆柱上绘制线条。 * 演示第一次扭转方法，通过控制加热和时间来创造扭曲的波浪纹。 * **第二次扭转：** * 演示使用点状加热法制作波浪纹的第二次方法。 4. **制作第二个卷曲纹彩色玻璃棒（使用玻璃碎料 - Frit）：** * **玻璃碎料应用：** 演示如何将玻璃碎料应用于基底圆柱。 * **黑色轮廓线：** 绘制黑色轮廓细棒。 * **透明覆盖层与第二个芯棒：** * 在基底圆柱上覆盖一层透明玻璃。 * 将第二个芯棒固定在玻璃中。 * **加热与扭转：** 演示如何加热并扭转熔化的玻璃，形成卷曲纹。 5. **制作第三个卷曲纹彩色玻璃棒（立方体结构 - 3色）：** * **立方体基底平台制作：** 演示如何制作立方体圆柱形基底平台。 * **三色应用：** 应用三种颜色以利于制作玻璃棒。 6. **制作第四个（最复杂）卷曲纹彩色玻璃棒：** * **基底制作与六色应用：** * 制作基底圆柱。 * 在圆柱周长上应用六种彩虹色。 * **黑色包覆轮廓：** 在每种颜色之间应用包裹有黑色的玻璃棒，形成轮廓线。 * **透明覆盖与第二个芯棒：** * 在圆柱上覆盖透明玻璃。 * 将第二个芯棒插入基底。 * **大力加热与扭转：** * 对基底圆柱施加大量热量，启动卷曲纹的形成过程。 * 热量控制和时机把握在此次制作中至关重要，以完成卷曲纹的形成。 7. **课程总结：** 简短的祝贺性回顾，结束课程。 **教学大纲：** 无
Wig-way canes are characterized by waves of color which are placed on a base core of glass. The class is intended for the beginning student and does not require a lot of experience or expensive tools and materials. The class will start with an introduction and a presentation slide of the class Syllabus. We will then review the prerequisites including having knowledge of basic lampwork safety requirements, a well ventilated work area and a pair of didymium safety glasses. It is also recommended that the students has a kiln to properly anneal their canes and beads.The class will start off with a review of how to make a barrel base on a 1/8" mandrel. Clear glass will be used as the core because it provides some stiffness to facilitate making the cane. The clear core will be covered by a white opaque glass. The instructor will then move directly into placing lines of black stringer on the base barrel and demonstrating the first twist method. The barrel will be heated up and the instructor will demonstrate how to use heat control and timing to create the twisted waves. The second method of creating waves will be also be demonstrated using a spot heating method.The second wig-wag cane will be made using glass frit. The instructor will demonstrate how to apply the frit to the base barrel and how to apply the black outline stringer. A clear cap of glass will be placed on the base barrel and a second mandrel will be set in the glass. Finally, the instructor will demonstrate how to heat and twist the molten glass into the wig-wag cane.The third cane will demonstrate how to make a wig-wag cane from 3 colors in a cube formation. The instructor will demonstrate how to make the cube barrel base platform and then apply 3 colors to facilitate the cane.The final wig-wag cane will be the most complex. The instructor will make the base barrel and then apply 6 rainbow colors around the circumference of the barrel. A black encased cane will be applied in between each color to provide an outline. A clear cap will be placed on the barrel and a second mandrel will be inserted into the base. A large amount of heat will be applied to the base barrel to start the process of creating the wavy wig-wag. Heat control and timing will be paramount in this cane to complete the wig-wag formation. A short congratulatory wrap up will conclude the class.
