|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/etap-transformer/
课程评论：没有评论
课程名称：ETAP变压器建模入门：循序渐进 课程概述： 如果你是一名电气工程学生、在职工程师或对ETAP中的变压器建模感到好奇的人，这门适合初学者的课程非常适合你。该课程旨在帮助完全的初学者了解如何在ETAP中设置、配置和分析一个双绕组变压器。无须事先具备ETAP经验！我们从基础知识开始，逐步引导你了解每个重要参数，确保即使是毫无基础的新手也能自信地建立和模拟变压器模型。 在本课程中，你将学习到： - 变压器在电力系统分析中的作用 - 如何正确配置ETAP的额定值和阻抗页面 - 理解变压器阻抗、抽头设置和X/R比 - 变压器在负荷流和故障仿真中的表现 - 计量单位值和短路试验对建模的影响 通过详细的解释、实际示例和动手演示，你将获得变压器建模的坚实基础，而不会被技术术语所淹没。到课程结束时，你会准确知道如何输入一台250 kVA、20/0.4 kV变压器的数据，设置阻抗参数，调整抽头值，以确保准确的ETAP仿真——即使你是从零开始！ 我们将建模一台250 kVA、20/0.4 kV的变压器，定义其额定值、阻抗和计量单位值。这台变压器将连接在一个20 kV母线（中压侧）和一个0.4 kV母线（低压侧）之间，为负载提供电力。 通过遵循这一循序渐进的指南，你将在ETAP中获得设置变压器和解释关键电气参数以进行仿真的实践经验。无论你是在为电力系统研究做准备、学习ETAP以便工作，还是扩展你的工程知识，这门课程都会让变压器建模变得简单易懂，人人都能学会。 立即加入我们，逐步掌握ETAP变压器建模的技能！
Are you an electrical engineering student, a practicing engineer, or simply curious about transformer modeling in ETAP? This beginner-friendly, step-by-step course is designed to help absolute beginners understand how to set up, configure, and analyze a 2-winding transformer using ETAP.No prior ETAP experience is required! We start with the basics and guide you through each essential parameter, ensuring even a complete novice can confidently build and simulate transformer models.In this course, you'll learn: * The role of transformers in power system analysis * How to correctly configure the Rating & Impedance Pages in ETAP * Understanding transformer impedance, tap settings, and X/R ratios * How transformers behave in load flow and fault simulations * The impact of per-unit values and short-circuit tests on modelingThrough detailed explanations, practical examples, and hands-on demonstrations, you'll gain a solid foundation in transformer modeling-without feeling overwhelmed by technical jargon.By the end of the course, you'll know exactly how to enter data for a 250 kVA, 20/0.4 kV transformer, set up impedance settings, adjust tap values, and ensure accurate ETAP simulations-even if you're starting from scratch!We will model a 250 kVA, 20/0.4 kV transformer, defining its rating, impedance, and per-unit values. The transformer will be connected between a 20 kV bus (MV side) and a 0.4 kV bus (LV side), supplying power to a load.By following this step-by-step guide, you'll gain hands-on experience in setting up a transformer in ETAP and interpreting key electrical parameters for simulations.Whether you're preparing for power system studies, learning ETAP for work, or expanding your engineering knowledge, this course will make transformer modeling simple and accessible for anyone.Join today and master ETAP transformer modeling-one step at a time!
