|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/etabs-safe-in-11m-span-slab-without-cracked-of-glass-walls/
课程评论：没有评论
课程名称：ETABS和SAFE在无裂缝玻璃墙的11米跨度梁中的应用 课程概述：本课程不仅是ETABS和SAFE软件的教程，更是对结构设计分析的全面理解。课程旨在帮助土木工程师了解如何启动项目、如何思考以及在建模之前如何确定构件的尺寸。课程内容包括11米跨度两向（x方向和y方向）平板的结构设计。首先，我们将回顾和研究项目的建筑平面图，然后准备平板的结构图，以便将其导入ETABS和SAFE，并使用AutoCAD进行处理。接下来，我们将确定平板的厚度，并检查在短期和长期荷载下的挠度，尤其是在存在玻璃墙的情况下，以确保挠度控制良好，避免裂缝和玻璃破损。此外，我们将选择适合该项目的最佳材料及所需的平板箍筋。最后，我们使用AutoCAD绘制该平板的结构执行图纸。我们还将研究是否需要使用落梁或深梁，并在必要时利用专业的软件进行梁的设计。
This course not just a tutorial on software ETABS and SAFE but it is a complete understanding about structural design analysis, how civil engineer must begin with the project, how he/she must think, how we can determine the dimension of the element before modeling them check it in the software. In this course we will show structural design of a slab with 11m spans in the two way ( direction x 11m ) and ( direction y 11m ). First of all we will review and study the architectural plan of the project then we will prepare the structural plan of the slab to import it into ETABS and SAFE using AutoCad. After this we will on the determination of the slab thickness. Also we will check the deflection of the slab on short term deflection and long term deflection with existence of glasses wall so the deflection must be checked well to prevent cracked and glass break. In addition to choose the best material of this project with the necessary reinforcement needed for this flat slab. Finally we draw the structural executive plans of this slab using AutoCAD. We study the need of using drop beam or deep beam and we will the design this beam if necessary using a very important software custom for beam design
