|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/etabs-prifessional-rc-building-design/
课程评论：没有评论
课程名称：ETABS专业钢筋混凝土建筑设计 课程概览： 本课程旨在教授学员如何使用ETABS软件进行钢筋混凝土建筑的设计与分析，涵盖住宅、商业和工业建筑的规划与草图绘制，以及相关的设计与施工标准。 主要内容： 1. 使用AutoCAD软件进行住宅、商业和工业建筑的规划和草图绘制。 2. 理解和阅读建筑平面图，并准备基础信息。 3. 依据建筑平面图绘制各层的梁和柱中心线图，包括基础梁和屋顶梁。 4. 在ETABS软件中进行建模，定义材料与截面，分配材料和截面，进行结构分析与设计。 5. 根据IS规范制作Excel表单，用于设计各个结构构件（如基础、柱、梁、板、楼梯、挡土墙等）。 6. 将软件设计结果导出至Excel，并与已准备的设计Excel表进行比较。 7. 根据荷载和构件尺寸对梁、柱、基础和板进行分组。 8. 获取最终设计结果，并确定梁、柱、板和基础的最终尺寸。 9. 按IS规范准备详细施工图纸。 10. 准备钢筋弯曲排程（Bar Bending Schedule）。 11. 按IS 1893规范设计抗震结构。 12. 按IS 875 PART-03规范设计抗风结构。 课程详细内容包括： - 绘制一栋住宅建筑的平面图（框架结构，G+1，最小1200平方英尺）。 - 绘制基础、首层和二层的梁布置图。 - 为上述平面图绘制柱布置图，采用适当的网格线和柱编号。 - 使用ETABS建模上述结构，包括建模、分析和设计。 - 对上述模型进行分析，应用适当的分析技术，并导出柱反力用于基础设计。 - 设计与细化孤立基础，进行柱和基础分组，设计一个典型孤立基础和基础布局。 - 绘制柱和基础的详细图纸。 - 为各层梁和板制作详细图纸及钢筋弯曲排程。 - 设计与细化楼梯及其着陆梁，并准备相应的钢筋弯曲排程。 本课程适合希望提升钢筋混凝土建筑设计能力的工程师与建筑师，通过理论与实际操作的结合，掌握现代建筑设计所需的知识与技能。
1. Planning and Drafting the Residential , Commercial and Industrial buildings in the Auto-cad software.2. Understanding and reading the architectural plan and preparing the basic information.3. Developing the center line diagram of the beams and columns for all the floors (PLINTH BEAM AND ROOF BEAMS OF ALL THE FLOORS) corresponding given architectural plan.4. Learning the modelling, defining the materials, sections, assigning the materials and sections, analyzing the structure, designing in ETABS software.5. Preparation of the Excel sheet as per IS code provisions for designing the individual structural members-Footing, column, beam, slab, staircase, retaining wall etc.6. Exporting the software design results to excel and comparing it with the design excel sheet prepared.7. Grouping of beams, columns, footings and slabs based on the loading and members dimensions.8. Obtaining the final design results and deciding the final dimensions of beams, columns, slabs and footings.9. Preparing the Detailed drawings as per the IS code provisions to execute in the site.10. Preparation of bar bending schedule.11. Design of earthquake resistant structures as per IS 1893 IS code.12. Design of wind resistant structures as per IS 875 PART-03.DETAIL DESCRIPTION OF COURSE IS GIVEN BELOW-Drawing a plan of a residential building. [Framed structure, G+1, minimum of 1200sft].-Drawing beam layout of plinth, ground floor and first floor.-Drawing column layout for the above plan. [Use of proper grid lines with proper column numbering.]-Modeling the above structure using ETABS. [Modelling, analyzing and designing].-Analysis of above model. [Applying appropriate analysis techniques, Exporting column reactions for foundation design.]-Design and Detailing of Isolated footing. [Column and Footing grouping, Design one typical isolated footing, & foundation layout.].-Detailed drawing of Column & foundation. -Preparing bar bending schedule.-Detailed drawing of Plinth beam. -Preparing bar bending schedule.-Detailed drawing of ground floor beam. -Preparing bar bending schedule.-Detailed drawing of ground floor slab. -Preparing bar bending schedule.-Design and Detailing of first floor beam and slab. -Preparing bar bending schedule.-Design and Detailing of dog legged stair case and landing beam. -Preparing bar bending schedule.
