|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/embedded-system-design-with-xilinx-zynq-soc-and-vitis-ide/
课程评论：没有评论
课程名称：使用Xilinx Zynq SoC和Vitis IDE进行嵌入式系统设计 概述：Xilinx Zynq SoC因其卓越的每瓦性能和灵活的重配置能力而闻名。Zynq系列集成了双核ARM Cortex A9处理器和7系列FPGA，可实现更快速的通信接口开发和硬件加速。Zynq设备分为两个类别：Zynq-7000s系列FPGA适用于成本效益较高的IoT等应用，而Zynq 7000系列FPGA则更适合嵌入式视觉等高性能应用。Zynq 7000s配备单核ARM，而Zynq 7000则配备双核ARM。 本课程涵盖流行的Xilinx驱动程序基础知识，如UART、AXI计时器、UART16550、AXI GPIO、AXI BRAM等。同时，课程还介绍了如何使用AXI中断控制器处理中断。此外，为了促进硬件加速器在基于Zynq的设计中的应用，课程中包括了构建自定义AXI外设的示例。课程还展示了软件和硬件调试及性能分析的基本原理，以帮助进行性能测量。 本课程将为学员打下必要的基础，使其能迅速开始在Zynq FPGA设备上构建应用，无需该领域的先前经验。整个课程以实验为基础，主要集中在处理简单外设（如GPIO）、中级外设（如UART PS、AXI BRAM）以及复杂外设（如AXI中断控制器、AXI计时器、GIC等）所需技能的培养。
Xilinx Zynq SoC's are know to provide maximum performance per watt along with maximum reconfiguration flexibility. Zynq family features Dual-Core ARM Cortex A9 processors tightly coupled with the 7-series FPGA to enable faster communication interfaces development with ARM Design flow and hardware acceleration. Zynq devices are available in two categories viz. Zynq-7000s family FPGA for the cost-effective application such as IoT related applications while Zynq 7000 family FPGA are best for high-performance applications such as Embedded Vision etc. The Zynq 7000s comes with Single core ARM while Zynq 7000 comes with Dual-Core ARM. This course covers fundamentals of Popular Xilinx drivers viz. UART, AXI Timers, UART16550, AXI GPIO, AXI BRAM, etc. The course also illustrates the usage of the AXI interrupt controller for handling Interrupts. Also to felicitate incorporation of Hardware accelerators with Zynq based design few examples on building Custom AXI Peripherals are also included. Software and Hardware Debugging, Profiling fundamentals are demonstrated with Zynq to felicitate performance measurement. This course will create the foundation necessary to quickly start building applications on Zynq FPGA devices without prior experience in this domain. The entire course is a Lab-based course with a major focussed on building skills necessary to handle simple peripherals such as GPIO, Intermediate Peripherals such as UART PS, AXI BRAM, and complex Peripherals such as AXI Interrupt Controller, AXI Timers, GIC etc.
