|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/dot1x-8021x-on-mikrotik-with-labs/
课程评论：没有评论
**课程名称：** MikroTik Dot1x (802.1x) 配置及实战 **课程概述：** 本课程旨在深入讲解 Dot1x (802.1x) 协议，该协议能有效防止未经授权的设备接入网络，是网络安全领域的重要工具。随着 RouterOS v6.45.1 的发布，MikroTik 设备开始支持 Dot1x，特别是 RouterOS v7 版本将 Dot1x 功能集成到 User Manager 软件中，使其能够充当认证服务器。本课程将详细介绍 Dot1x 的工作原理，并重点演示如何在 MikroTik 设备上进行配置。 **学习目标：** * 全面理解 Dot1x (802.1x) 协议的原理和机制。 * 掌握在 MikroTik 设备上配置 Dot1x 认证（包括 MAC 认证和用户账户认证）。 * 学习如何为通过 Dot1x 认证的设备分配 VLAN。 **课程要求：** * 需要至少三台 MikroTik 设备，推荐使用两台 Hap Lite 和一台 CRS3xx 系列交换机。如果无 CRS3xx 系列交换机，可用其他 MikroTik 路由器/交换机代替。 **课程内容：** 1. **Dot1x 协议详解：** * 介绍 Dot1x 的概念、作用和工作流程。 * 解释 Dot1x 在网络安全中的重要性。 2. **MikroTik Dot1x 配置实操：** * **MAC 认证：** 演示如何通过设备的 MAC 地址进行 Dot1x 认证。 * **用户账户认证：** 演示如何通过用户名和密码进行 Dot1x 认证，并利用 MikroTik User Manager 作为认证服务器。 3. **VLAN 分配：** * 讲解如何根据 Dot1x 认证结果为接入设备动态分配 VLAN。 **总结：** 完成本课程后，学员将对 Dot1x 协议有深入的理解，并能够熟练地在 MikroTik 设备上部署和配置 Dot1x 安全认证，有效提升网络安全性。
Dot1x (802.1x) is a protocol that does not have a lot of attention for many network engineers while it can secure your network from un-authorized access to it.Fortunately, since RouterOS v 6.45.1, MikroTik has added Dot1x protocol on its Switches/Routers allowing everyone to use it. Since RouterOS v7, MikroTik has added Dot1x on the User Manager software to act as the Authentication server for the Dot1x supplicants, this has made me to decide making a course speaking in details about Dot1x and show how you can configure on MikroTik.In this course, you need to have 3 MikroTik routers. I am going to use 2 Hap lite and 1 CRS3xx series switch. If you do not have a CRS3xx series, that's ok to replace it by another MikroTik router/switch.I will explain to you what is dot1x and how it works, then I am going to show you how you can do dot1x authentication using MAC authentication and user accounts, and in the last part of the course I will show you how you can assign VLANs for authenticated machines.Finally, if you want to understand everything about Dot1x and you want to know how to configure this protocol on MikroTik, all you need to do is to enroll in my course and by end of the course you will have a full understanding on this protocol and able to configure it easily on MikroTik products
