|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/creo-parametric-sheetmetal-design/
课程评论：没有评论
课程名称：Creo 2.0 钣金设计 课程概述：本课程将教授钣金设计的流程，包括钣金模型的创建、转换和展示，开发长度计算方法，主要和次要壁特征，部分墙体，弯曲补救，展开和恢复特征，钣金弯曲特征，平面展开，钣金切割，成形，缺口和冲孔特征，钣金环境设置，设计信息工具，以及钣金设计规则。 课程内容涵盖： 1. Creo Parametric 钣金设计流程简介 2. 钣金模型基础 3. 创建主要钣金壁特征 4. 创建次要钣金壁特征 5. 钣金模型的弯曲与展开 6. 修改钣金模型 7. 钣金设置与工具 8. 钣金设计细节 关于钣金设计属性：钣金的属性及相关设置可用于预定义常见特征几何图形、自动化任务及保持钣金零件设计一致性。这些设置的值取决于预定义的钣金参数。钣金特有的属性包括在模型属性对话框的钣金部分可用的以下内容： - 弯曲补偿：用于显示弯曲补偿计算的因子类型，以及模型是否分配了弯曲表。 - 弯曲：显示弯曲的半径尺寸和尺寸标注位置。 - 补救：显示弯曲和角落补救的类型。 - 边缘处理：显示边缘处理的类型。 - 斜割：显示斜割的宽度和偏移。 - 固定几何体：显示在展开、恢复和展开图模式下保留固定的部件几何体。 - 弯曲顺序：显示为模型定义的弯曲顺序序列的数量。 - 设计规则：显示为模型定义的设计规则数量。 - 平坦状态实例：显示为在旧版本中创建的通用模型定义的平坦状态实例数量。 本课程旨在帮助学员掌握Creo 2.0软件的钣金设计技巧，提升设计效率。
In this course, you will learnThe sheet metal design processSheetmetal model creation, conversion, and displayMethods of developed length calculationPrimary wall featuresSecondary wall featuresPartial wallsBend reliefUnbend and bend back featuresSheetmetal bend featuresFlat patternsSheetmetal cutsFormsNotch and punch featuresSheetmetal environment setupSheetmetal design Information toolsSheetmetal design rulesDetailing sheetmetal designsTopics Covered: 1: Introduction to the Creo Parametric Sheetmetal Design Process 2: Sheetmetal Model Fundamentals 3: Creating Primary Sheetmetal Wall Features 4: Creating Secondary Sheetmetal Wall Features 5: Bending and Unbending Sheetmetal Models 6: Modifying Sheetmetal Models 7: Sheetmetal Setup and Tools 8: Detailing Sheetmetal DesignsAbout Sheetmetal Design PropertiesSheet metal properties and their associated settings can be used to predefine common feature geometry, automate tasks, and maintain design consistency for sheet metal parts. The values of these settings depend on any predefined sheet metal parameters. The following properties specific to sheet metal are available in the Sheetmetal section of the Model Properties dialogue box:• Bend Allowance-Displays the factor type for bend allowance calculations and whether a bend table is assigned to the model.• Bends-Displays the radius size and the location for dimensioning bends.• Relief-Displays the type of bend and corner relief.• Edge Treatment-Displays the type of edge treatment.• Miter Cuts-Displays the width and offset of miter cuts.• Fixed Geometry-Displays the part geometry to remain fixed during unbend, bend back, and flat pattern operations.• Bend Order-Displays the number of bend order sequences defined for a model.• Design Rules-Displays the number of design rules defined for a model.• Flat State Instances-Displays the number of flat state instances defined for a generic model created in legacy releases older than Creo Parametric
