|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/compressor-piping-and-layouts/
课程评论：没有评论
课程名称：压缩机管道与布局 课程概述：本课程深入探讨与压缩机相关的管道和布局问题，全面了解这一过程工厂中最关键和复杂的旋转设备之一。该课程旨在帮助参与压缩机系统设计、布局或维护的工程师和专业人士，揭示压缩机管道系统的基本技术方面、布局挑战和最佳实践。参与者首先接触压缩机及其相关组件的基础知识，建立对核心设备和确保高效操作的外部系统的清晰理解。课程深入分析压缩机辅助设备，包括润滑油系统、密封系统和冷却要求，这些都是维持机械完整性和性能的关键。 特别强调蒸汽轮机驱动的压缩机，涵盖其独特的管道和布局需求，包括冷凝水和蒸汽的引导、控制阀的布置和安全间距。学习者还将了解如何决定压缩机的适当高度，考虑吸入条件、净正吸入高度（NPSH）要求、维护通道以及与工艺管线的接口。课程最后以两部分的模块总结布局方面，展示实际配置、管道安排、进出要求和空间考虑。通过简化的可视化和实用见解，课程确保学习者能够可视化和实施有效的压缩机布局。 无论是从头设计还是审查现有系统，本课程都将为您提供必要的技术基础和实用工具，以自信和胜任地应对压缩机布局的挑战。 覆盖的五个模块如下： 1. 压缩机的定义和类型 2. 压缩机的相关项目 3. 蒸汽轮机驱动的压缩机及其相关项 4. 如何确定压缩机的高度（所有组合） 5. 管道布局方面 目标受众：该课程面向机械工程师、管道设计师、工艺工程师及涉及压缩机系统设计、安装、操作和维护的专业人士，适用于石化、电力制造及石油天然气等行业。 先决条件：建议具备机械工程原理和管道设计基础知识，但课程适合不同经验水平的参与者。 注意：课程内容和目标可能会根据压缩技术和行业需求的进展进行更新。
This course provides an in-depth exploration of the piping and layout considerations related to compressors - one of the most critical and complex rotating equipment used in process plants. Designed for engineers and professionals involved in design, layout, or maintenance of compressor systems, this course unpacks the essential technical aspects, layout challenges, and best practices associated with compressor piping systems.Participants begin with a foundational introduction to compressors and their associated items, building a clear understanding of the core equipment and peripheral systems that ensure efficient compressor operation. The course dives deep into compressor auxiliaries, including lube oil systems, seal systems, and cooling requirements, which are essential for maintaining mechanical integrity and performance.Special emphasis is given to steam turbine-driven compressors-covering their unique piping and layout demands, including condensate and steam routing, control valve arrangements, and safety spacing. Learners also explore how to determine the proper elevation for compressors, taking into account suction conditions, NPSH requirements, maintenance access, and interface with process lines.The course concludes with a comprehensive two-part module on layout aspects, illustrating real-world configurations, piping arrangements, access requirements, and spatial considerations. By using simplified visuals and practical insights, the course ensures that learners can visualize and implement effective compressor layouts.Whether you're designing from scratch or reviewing an existing system, this course equips you with the technical foundation and practical tools needed to handle compressor layout challenges confidently and competently.Following five modules shall be covered:1. Definitions and types of compressors2. Associated items of compressors 3. Steam turbine driven compressors & associated items4. How to decide the elevation of compressors (all combinations)5. Piping layout aspectsTarget Audience: This course is designed for mechanical engineers, piping designers, process engineers, and professionals involved in compressor system design, installation, operation, and maintenance across industries such as petrochemicals, power generation, manufacturing, and oil and gas.Prerequisites: A fundamental understanding of mechanical engineering principles and piping design concepts is recommended, but the course is designed to accommodate participants with varying levels of experience.Note: Course content and objectives are subject to updates based on advancements in compressor technology and industry requirements.
