|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/cisco-wlc-9800-install-admin-config-and-tshoot-fundamentals/
课程评论：没有评论
本课程（Cisco WLC 9800 安装、管理、配置和故障排除基础）旨在教授学员如何安装、管理、配置和故障排除 Cisco 最新的无线局域网控制器 9800-CL。 课程首先介绍 VMware Workstation Pro 的下载与安装，然后详细讲解 WLC 9800-CL 的安装过程及其图形用户界面 (GUI) 的初步认识，并会涵盖 WLC 9800 以太网端口的配置。 接着，课程将深入学习如何在 WLC 9800 上创建位置信息并添加预共享密钥 (PSK) 无线局域网 (WLAN)。之后，会指导学员如何配置无线接入点 (AP) 并使其与客户端连接。本阶段的最后一个主题是添加支持 802.1x Flexconnect 选项的新 WLAN。 下一部分内容涵盖更多高级配置，包括不同选项下的位置配置和 AP 配置，进一步学习创建用于 Flexconnect 位置的策略和标签。此外，还会讲解 AP 的交换机端口配置以及 AP 的 SSH 配置。 随后，课程将重点关注 WLC 的配置，包括 SNMP、命令行界面 (CLI) 管理以及 VLAN 的配置。在完成通用配置步骤后，将详细讲解 WLC 上的策略配置，包括 802.1X 策略标签和配置文件的配置，以及在 AP 上创建策略标签。 课程的最后阶段将侧重于数据包捕获和故障排除。学员将学习如何在 WLC 上配置数据包捕获，并深入分析捕获到的数据和追踪信息。课程将以两个针对不同 WLAN SSID 故障排除场景的案例进行总结。 **核心内容要点概览：** * VMware Workstation Pro 安装 * WLC 9800-CL 安装与 GUI 介绍 * WLC 9800 以太网端口配置 * 创建位置与添加 PSK WLAN * AP 配置与客户端连接 * 添加 802.1x Flexconnect WLAN * Flexconnect 位置配置、AP 配置、策略与标签创建 * AP 交换机端口配置与 SSH 配置 * WLC SNMP 配置 * WLC CLI 管理 * WLC VLAN 配置 * 802.1X 策略标签与配置文件配置 * AP 策略标签配置 * WLC 数据包捕获配置（包括 AP 加入过程、客户端认证追踪） * 分析追踪捕获输出文件和 ISE 日志 * WLAN SSID 连接性故障排除案例分析
Welcome to Cisco WLC 9800 Install Admin Configuration and Tshoot Fundamentals course. You will learn how to install, manage, configure and troubleshoot Cisco's latest Wireless Lan Controller 9800-CL. First of all, we will learn how to download and install VMware Workstation Pro, after that we will go over the steps of how to install WLC 9800-CL and we will introduce ourselves with its GUI then we will learn how to configure WLC 9800 Ethernet Ports. After these introductory chapters, we will learn how to create a location and add a PSK WLAN on WLC 9800. We will continue learning to provision an AP on WLC 9800 and how to connect with a client. We will end this WLAN configuration section with adding a new WLAN with 802.1x Flexconnect options. Next section will start with location configuration and ap provisioning with different options and we will continue while creating policies and tags for flex location. AP switchport configuration and ssh configuration on APs will be the last part of this section. Next, we will focus on WLC configuration such as SNMP, managing via CLI and VLANs. After going over general configuration steps, we will deal with policies on our WLC. We will configure 802.1X policy tags and profiles and then we will create policy tags on APs. In the last sections, we will learn more about packet captures and troubleshooting steps. Configuring packet captures on our WLC and investigating those captures and traces will be our main goal. We will finish the course with two cases that are focusing on different troubleshooting steps on WLAN SSIDs. VMware Workstation Pro9800-CL InstallationWLC 9800 GUI IntroductionWLC 9800 Ethernet Port Configuration OverviewHow To Create A Location and Add A PSK WLAN on WLC 9800How To Provision An AP on WLC 9800 and Connect With A ClientHow To Add A New WLAN With 8021X Flexconnect OptionsLocation Configuration and AP ProvisioningCreating Policies and Tags For Flex LocationAP Switchport Configuration and Configuring SSH on APConfiguring SNMP on WLCCommand Line Interface on WLC 9800Configuring VLANs on WLCConfiguring WLAN with 8021X Policy Tags and ProfilesConfiguring Policy Tags on APsConfiguring WLC to Capture PacketsConfiguring WLC to Capture Packets of AP Join ProcessConfiguring Radioactive Trace on WLC to Capture Client AuthenticationInvestigating Radioactive Trace Capture Output FileInvestigating ISE Logs and Capture Output FileTroubleshooting WLAN SSID Connectivity Case 1Troubleshooting WLAN SSID Connectivity Case 2Thank You
