|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/cisco-switching-tshoot-labs-for-ccna-ccnp-and-ccie-students/
课程评论：没有评论
课程名称：思科交换机 TSHOOT 实验（适用于 CCNA、CCNP 和 CCIE 学生） 课程概述： 该课程是“思科故障排除实验室（CCNA、CCNP 和 CCIE 学生）”的组成部分，是 IT 故障排除类别中的畅销课程。故障排除是网络工程师的一项基本且重要的技能。网络工程师不仅需要了解如何配置网络设备，还需要知道如何对它们进行故障排除。高效的故障排除必须系统化和逻辑化，而不是通过随机试错。交换机是您网络的基石，连接着所有其他设备。因此，了解如何进行故障排除是整个故障排除过程中的第一步也是关键一步。 本课程将演示思科交换机的故障排除方法，帮助您在实际生产环境中排除思科交换机的故障，并为 CCNP TSHOOT 考试以及 CCIE 实验室考试的故障排除部分做准备。如果您已具备 CCNA 级别的知识和/或经验，或正在学习 CCNA，则可以使用本课程作为学习高级故障排除的起点。 除了视频，本课程还采用多种讲解方式。课程开始提供一份总结了故障排除步骤的可下载 PDF 文章，建议在观看视频前阅读。对于每个实验，都会提供初始配置供下载，以便学生练习实验，并在观看视频之前或之后挑战自己能否解决问题。此外，还将提供练习测试，供学生检验所学知识。某些故障可能存在多种解决方案，但已设置限制，确保只有一个有效解决方案。让我们一起开始课程，踏上故障排除之旅。祝您故障排除愉快！ 课程大纲：无
*** Part of the full Course: Cisco Troubleshooting Labs For CCNA, CCNP, and CCIE Students (The best seller course in the IT troubleshooting Category ) ***Troubleshooting is an essential and important skill for network engineers. As a network engineer, you have to know not just how to configure network devices, but also how to troubleshoot them. And for troubleshooting to be efficient, it has to be systematic and logical and not by random trial and error attempts. Switches are the foundation of your network, connecting all other devices together. Therefore, knowing how to troubleshot them is the first and the key step in the overall troubleshooting process.In this course, I will demonstrate troubleshooting of Cisco Switches. You can use this course to learn how to troubleshoot Cisco switches in real production and to help you to prepare for the CCNP TSHOOT exam and the Troubleshooting sections of the CCIE lab exams. If you are already have CCNA level knowledge and/or experience, or you are in the middle of your CCNA studies, then you can use this course as a start for learning advanced troubleshooting.This course uses multiple explaining ways in addition to videos. At the beginning of the course there is an article for summarized troubleshooting steps that is available for download as a PDF and which I recommend to be read before watching the videos. And for each lab, initial configuration will be available for download in order for students to practice the labs and challenge themselves if they can solve the tickets before watching the videos or even after. In addition, there will be a practice test for the student to check what he has learned. Some tickets have multiple possible solutions. Therefore, restrictions have been set so that there should be only one valid solution. Let us start the course together and begin the troubleshooting journey. Happy troubleshooting!
