|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/cisco-ccna-200-301-labs-only-dont-just-be-a-paper-cert/
课程评论：没有评论
课程名称：思科CCNA 200-301实操实验课程 课程概述： 本课程完全以实践为基础，适合希望通过掌握思科交换机和路由器的命令行接口（CLI）来快速开启IT和网络事业的人士。通过全模拟实验，您将获得实际操作技能，仿佛身处真实网络环境中。 课程亮点： - 本课程模拟了初级网络工程师在公司工作至少两年的经验。 - 通过实际操作思科路由器和交换机，提升您的技能。 您将获得的主要知识： 1. IP地址分配（公有与私有网络）、子网划分及TCP/UDP端口。 2. 路由器和交换机的用途及必要性分析。 3. 基础CLI设置，包括主机名、密码、用户名、历史记录大小、横幅和密码加密。 4. 路由器的直接和远程（Telnet、SSH）连接设置。 5. 接口的IP地址、描述、双工与速度配置。 6. 从基础到高级的路由器CLI学习。 7. 如何突破（黑客攻击）路由器和交换机。 8. 路由器/交换机配置及IOS的备份与恢复。 9. 路由器和交换机的横幅设置。 10. MAC地址表与路由表的定义。 11. NTP服务器的功能。 12. AAA的概念。 13. 如何在路由器上配置和管理DHCP服务器。 14. DHCP中继的作用及工作原理。 15. DHCP Snooping的使用场景。 16. NAT的配置及其类型（静态NAT、动态NAT、PAT）。 17. 如何基于访问控制列表过滤流量（标准、扩展、命名）。 18. 为路由器提供容错机制（HSRP）。 19. TCP/IP分类及私有与公有网络理解。 20. 如何配置和管理思科交换机的直接和远程连接。 21. 使用端口安全性来保护交换机。 22. VLAN的目的及不同VLAN间的路由（VLAN间路由）。 23. VTP在大规模网络中的重要性和应用。 24. EtherChannel及其类型（LACP、PAGP）。 25. 交换机的干道技术及其目的。 26. 交换机与三层设备（多层交换机）的区别。 27. 交换机与集线器的区别。 28. TCP/IP地址与子网划分。 29. 交换机循环及利用STP/RSTP防止循环。 30. 不同站点间的路由配置。 31. 静态路由、浮动路由与默认路由的配置。 32. 动态路由与静态路由的区别及使用场景。 33. 动态路由协议（RIP、OSPF、EIGRP）的配置。 34. 重要的通配符掩码及其在某些路由协议中的应用。 35. 路由协议容错机制。 36. TCP/IP及其分类。 37. 有类网络与无类网络的区别。 38. 学习子网划分。 39. 如何保护路由协议的安全。 40. DHCP服务器的配置与管理。 41. DHCP中继功能及工作方式。 42. DHCP Snooping的使用场景。 43. NAT的配置及其类型（静态NAT、动态NAT、PAT）。 44. 如何基于访问控制列表过滤流量及其类型。 45. 路由器的容错机制（HSRP）。 46. 理解TCP/IP分类（私有与公有网络）。 适合人群： 1. 网络工程师/系统管理员。 2. IT支持技术人员。 3. 帮助台分析师。 4. 一切想进入IT领域的人士。 关于课程的事实： - 您是否需要工作经验？无论您是否在IT领域工作，均可参加此课程。 - 我已经在IT领域工作，这门课程对我有帮助吗？在IT领域的工作并不意味着您涵盖了所有网络概念。 - 课程结束时，我会获得证书吗？是的，您将获得完成证书。
About This Class ( My Entire Course is 100% HANDS ON)If you want to jumpstart your career in IT and networking by acing The CLI For Configuring Cisco Switches/Routers Than This Course Is For You.This is the one course you need Master The CLI. 100% Full lab Simulation is Covered so you'll get the hands-on practical skills as you are working on real world networks.Why This ClassThis Short Course Will be the same as You worked as a Junior Network Engineer For a Company For at least 2 Years. This Class Will be The same as You were Setting Up Cisco Routers And Switches In a Real Environment.What Will You Gain From This ClassThis course will teach you and enhance your skills in better understating by actually doing it as we were in the same classroom utilizing Cisco Routers And Switches using Cisco Packet Tracer.In This Course you will not just learn you will actually do it yourself as if you were in an actual company and here are the key topics that you will gain from this class.1) IP Addressing /(Public, Private Networks) /Subnetting/ (TCP,UDP Ports)2) What's The Purpose Of A Router And A Switch and Why Need It.3) Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.4) Setting Direct and Remote (Telnet,SSH) Connections To The Router.5) Configuring IP Address/Description/Duplex/Speed To Interfaces.6) Basic To Advanced Router CLI. (Learn CLI From Zero To Hero).7) How To Break(Hack) Into The Router And A Switch.8) Backup And Restore Router /Switch Config and IOS To And From A TFTP Server.9) Setup A Banner For The Router And A Switch10) What is A MAC Address Table And A Routing Table.11) What Is an NTP Server.12) What Is AAA.13) How To Configure And Manage DHCP Server On A Router14) What is A DHCP Relay and How It Works15) When Do You Need DHCP Snooping.16) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).17) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)18) How Can We Provide Fault Tolerance For A Router (HSRP).19) Understanding Of The TCP/IP Classes (Private And Public Networks).20) How To Configure And Manage A Cisco Switch For Direct And Remote (Telnet,SSH) Connections.21) How To Secure The Switch Using Port Security22) What's The Purpose Of The VLANS And How To Route Between Different VLANs (Inter VLAN Routing).23) When Do I need VTP and Its Importance on Large Scale Network.24) What is an EtherChannel and Its Types (LACP,PAGP).25) What is Trunking and Its Purpose On The Switch26) What is The Difference between a Switch and a Layer3 Device (Multilayer Switch).27) What is The Difference between a Switch and a Hub.28) TCP/IP Addressing And Subnetting.29) What Are Switch Loops And How To Prevent Them Using STP/RSTP.30) How To Configure Routing Between Different Sites31) Configure Static Routing / Floating Routes And Default Routes32) What is The Difference between Dynamic and Static Routing and When To Use.33) Configure Dynamic Routing Protocols (RIP,OSPF,EIGRP)34) What Is The Wild Card Mask and Why Important For Some Routing Protocols.35) How Can We Provide Fault Tolerance For Routing Protocols.36) What Is TCP/IP And Its Classes 37) What's The Difference Between Classful and Classless Networks 38) Learn Subnetting.39) How To Secure Routing Protocol.40) How To Configure And Manage DHCP Server On A Router41) What is A DHCP Relay and How It Works42) When Do You Need DHCP Snooping.43) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).44) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)45) How Can We Provide Fault Tolerance For A Router (HSRP).46) Understanding Of The TCP/IP Classes (Private And Public Networks).Who is This Class For 1) Network Engineers /System Administrators.2) IT Support Techs.3) Help Desk Analyst.4) Any One Who wants to get themselves in The IT Field.Facts About The CourseDo I need any Work experience?If You or Don't Work In The IT Field You Should Be Fine Taking This Course.I Already Work In The IT Field Will I Benefit From This Course?Working In The IT Field Doesn't Mean You Will Cover All Concepts Of Networking.Will I get a certificate of completion at the end?Yes You Will.
