|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/ccna-routing-switching-labs/
课程评论：没有评论
**课程名称：** CCNA 路由与交换实验室 **课程概述：** 本课程专为即将参加 CCNA 认证考试的学生设计，以实践操作为主，理论知识约占 15-20%。通过大量的实验室练习，学生将深入理解并牢固掌握 CCNA 认证所需的各项主题。课程侧重于提升动手能力，因为作为网络管理员，配置和排查设备的能力至关重要。虽然建议具备一定的理论基础，但讲师也会在实验过程中提供必要的理论信息。 **核心内容：** 1. **端口配置：** 接入端口和 Trunk 端口配置。 2. **Trunk 封装：** 设置 Trunk 上的封装。 3. **动态 Trunk：** 配置动态 Trunk。 4. **Router-on-a-Stick：** 实现路由器的 Router-on-a-Stick 设置。 5. **VTP 配置：** 学习 VLAN 中继协议 (VTP) 的配置。 6. **STP 与根桥选举：** 理解生成树协议 (STP) 及根桥选举过程。 7. **STP 根端口与开销/端口：** 掌握 STP 根端口和开销的配置。 8. **EtherChannel：** 学习 EtherChannel 的配置及其工作模式。 9. **端口安全：** 在交换机端口上配置端口安全。 10. **路由器 IP 地址配置：** 为路由器配置 IP 地址。 11. **路由器访问安全：** 加固路由器的访问安全。 12. **静态路由：** 配置静态路由。 13. **浮动静态路由：** 学习配置浮动静态路由。 14. **默认静态路由：** 配置默认静态路由。 15. **动态路由 - RIP：** 学习路由信息协议 (RIP)。 16. **RIP 认证：** 配置 RIP 的认证模式和密钥链。 17. **动态路由 - EIGRP：** 学习增强型内部网关路由协议 (EIGRP)。 18. **EIGRP 可行距离条件：** 理解 EIGRP 的可行距离条件。 19. **EIGRP 定时器与被动接口：** 配置 EIGRP 的定时器和被动接口。 20. **OSPF 配置：** 学习开放最短路径优先 (OSPF) 协议。 21. **路由协议对比：** 对比 OSPF、EIGRP 和静态路由。 22. **OSPF DR/BDR 选举：** 掌握 OSPF 指定路由器 (DR) 和指定备份路由器 (BDR) 的选举过程。 **讲师承诺：** 课程将持续更新 Pending Labs。讲师来自印度，口音可能带有印度特色。课程提供 30 天内全额退款保证。鼓励学员观看免费预览以了解讲师的教学风格。 **目标学员：** 希望在短期内获得 CCNA 认证，并且寻求大量实践操作经验的学生。
This course has been designed for students who are studying CCNA for getting their certification in coming weeks. It is going to be a complete lab based course with only 15 to 20% theory. You will get good understanding and solid foundation on topics which are part of CCNA certification.I've seen many courses with lot of theory but less practical. There is no doubt that theory portion is important however, one must not forget that practical knowledge gets you good and bright career. As an network administrator, expectations will be to configure or troubleshoot devices which will be possible if you are good in hands on.You should have prior understanding on Theory topics, however, I have tried my best to give you as much information as possible along covering labs.Main Topics will be 1. Access/Trunk Port Configuration2. Setting Encapsulation on Trunks3. Dynamic Trunk 4. Routing on Stick Setup Lab 5. VTP Configuration Lab6. STP and Root Bridge Election7. STP Root Port and Cost8. EtherChannel and Its Modes9. Port Security on SwitchPorts10. IP Addressing on Routers11. Securing Router Access12. Static Routing Lab13. Floating Static Route Lab14. Default Static Route Lab15. Dynamic Routing - RIP ( Routing Information Protocol)16. RIP Authentication Modes and Key Chain Lab17. Dynamic Routing - EIGRP ( Enhanced Interior Gateway Routing Protocol) Lab18. EIGRP Feasible Condition Lab19. EIGRP Timers and Passive Interfaces20. OSPF Configuration Lab21 OSPF vs EIGRP vs Static Route Comparison22 OSPF DR BDR Election LabPending Labs will be added very soon. You will surely not be disappointed with this course. You can check some of the reviews and feedback people have given to my courses.I assure you that you are at right course. If you are not happy, then apply for full refund in 30 days time as per Udemy Policies and guidelines.Do watch free previews to make good understanding on how Instructor teaches. I am from India and my accent will be accordingly.
