|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/ccie-data-center-multicast/
课程评论：没有评论
课程名称：Cisco数据中心组播 课程概述：Cisco数据中心组播课程旨在为网络工程师提供资源，以理解和部署IP组播技术，适用于现代数据中心和企业网络，并帮助CCIE数据中心认证候选人有效准备考试。课程首先通过图示和简短的解释介绍组播的基本概念，解答“什么是组播，为什么需要组播？”的问题。接下来，课程讨论了二层（MAC）和三层（IP）组播寻址，并展示如何将IPv4组播地址映射到组播MAC地址。 该课程深入探讨组播协议，包括主机到路由器的信令协议IGMP和路由器之间的控制平面协议PIM。建立组播基础知识后，课程还涵盖了更高级的主题，如动态RP（Auto-RP和BSR）、任播RP（PIM Anycast和MSDP）以及双向PIM（Bidir PIM）。 该组播学习材料适合广泛的受众，特别是针对Cisco认证候选人（CCIE数据中心/CCNP数据中心）、网络架构师、工程师及运维人员，让网络专业人士和数据中心管理员均能从中受益。课程包含高质量的技术视频、实验室演示、测验、外部资源、数据包捕获和协议报文格式等内容，并附有可下载的PDF幻灯片，便于参考。 课程分为七个部分： 1. 组播基础：介绍组播基本概念及其L2和L3寻址。 2. IGMP协议（主机到路由器组播）：学习Internet组管理协议（IGMP），用于组播接收者与其组播路由器（查询者）间的通信。 3. IGMP特性：涵盖IGMP查询、IGMP嗅探和IGMP版本3的相关内容。 4. PIM协议（路由器间组播）：了解协议无关组播（PIM）及其在三层网络中转发组播流量的方式。 5. 动态RP：学习两种动态方法（Auto-RP和BSR）为PIM启用的Nexus交换机分配RP地址。 6. 任播RP：学习如何通过PIM任播RP和MSDP实现PIM RP的冗余。 7. PIM-Bidir和幻影RP：探讨Nexus交换机中的双向PIM（Bidir PIM）及如何利用幻影RP实现冗余。 该课程为希望深入了解组播技术的网络专业人士提供了宝贵的学习资源。
The Cisco Data Centers Multicast course aims to provide a resource for network engineers to understand and deploy IP multicast technology for today's data centers and enterprise networks. And to help CCIE Data Center certification candidates prepare well for their exams.It begins with an introduction to the basic concepts of multicast through the use of graphics and short explanations. It answers the question: What is multicast, and why is it needed? This Multicast course then discusses Layer-2 (MAC) and Layer-3 (IP) Multicast addressing. It also shows how to map the IPv4 Multicast address to the Multicast MAC address.The Cisco Data Centers Multicast course takes a deep dive into the Multicast protocols, including the host-to-router signaling protocol i.e. IGMP, and the router-to-router control plane protocol i.e. PIM.After building the Multicast foundational knowledge, it covers more advanced topics such as dynamic RPs (Auto-RP & BSR), anycast RP (PIM anycast & MSDP), and bidirectional PIM (Bidir PIM).This Multicast learning material has been designed with a broad audience in mind while specifically targeting Cisco certification candidates (CCIE Data Center / CCNP Data Center), network architects, engineers, and operators. You do not have to be a networking professional or data center administrator to benefit from this course.This professional development and foundational learning multicast course contains the following:High-quality, technical, on-demand videos cover all essential multicast topics.Lab demos for a better explanation of all the features learned in the course. Quizzes to confirm correct understanding.External resources to enrich your multicast knowledge.Packet captures and protocol message formats for detailed information.Downloadable PDF slides for easy referencing.The lectures in this course were divided into 7 sections:Multicast Fundamentals: Covers Multicast basics and Multicast L2 and L3 addressing.IGMP Protocol (Host-to-Router Multicast): You will learn the Internet Group Management Protocol (IGMP), which is used between the Multicast receiver and its Multicast router (Querier).IGMP Features: This section covers IGMP Querier, IGMP Snooping, and IGMP version 3.PIM Protocol (Router-to-Router Multicast): You will learn the Protocol Independent Multicast (PIM), and you will understand how Multicast traffic is forwarded in layer-3 networks.Dynamic RPs: In this section, you will learn two dynamic methods (Auto-RP and BSR) to assign RP addresses to PIM-enabled Nexus switches.Anycast RP: In this section, you will learn how to implement redundancy in PIM RP by using PIM Anycast RP and Anycast RP with MSDP.PIM-Bidir & Phantom RP: This section covers the Bidirectional PIM (Bidir PIM) in Nexus switches and will learn how to use phantom RP for redundancy.
