|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/build-drone-fishing-payload-release-start-a-small-business/
课程评论：没有评论
课程名称：构建无人机钓鱼投放装置 - 启动小型企业 课程概述：随着无人机的广泛应用，其负载释放机制已成为提升无人机性能的重要元素。该机制基本上依赖于一种小型伺服电机，虽然这一电机的成本仅为一两美元，但市场上相关设备的售价普遍在100至200美元以上，个别小型企业在亚马逊和易贝上售卖的设备价格通常在50至100美元之间。本课程将逐步教你如何以约2美元的成本构建无人机投放系统，并为你提供基于该设备的易于操作的小型企业创意。 课程内容包括三种可能的构建场景： 1. 第一种场景，最简单的设置 - 具备俯仰引脚的无人机 - 云台插口 - 或其他控制引脚（信号 - 正 - 负，3至7伏），由发射器控制。 2. 第二种场景：具备飞行中受控灯光的无人机（多数无人机具备此功能）。 3. 第三种场景与第二种相同，仍是具备飞行中受控灯光的无人机，但本场景将讲解如何为希望通过该装置创业的人士构建可直接发货的设备。 本课程的主要目标是帮助你构建一个简单的无人机负载释放系统。前两种场景相对容易，而第三种场景因需要建立电子电路而稍显复杂。该电路虽然简单，由PNP晶体管、二极管、光敏电阻和电池构成，但在商业生产中，优化设计与多次测试以避免出错至关重要，因为任何小错误都可能导致差评和低评级，从而影响创业成功。 此外，课程还包含一份完整的指南（PDF文件），教你如何避免在钓鱼过程中无人机坠毁或者掉入海中，这些经验基于作者四年的实践和超过300次飞行的无事故记录。
With the wide spread of drones and their uses in many fields, the payload release mechanism has become one of the most important additions that let you take your drone to the next level.This mechanism is based essentially on a small servo motor. Even though this servo motor costs only one to a few dollars depending on specifications, these devices are still pricy, $100 to $200 or even more, except for small individual businesses we find time to time on amazon and ebay which sell their devices under $100 but not less than $50 in many cases.In this course, I will teach you step-by-step how to build a drone payload release system for about $2.This course will also give you a simple idea on how to build a small individual business based on this device.This course discusses how to build a payload release system in three possible scenarios:1-The first scenario, which is the simplest - Drone that has a pin for tilt - Gimbal socket- or any other pin (Signal - Positive - Negative, 3 to 7 volts) controlled by the transmitter.2-The second scenario: drone with controlled light during flight (most drones).3- The third scenario is the same as the second scenario, drone with controlled light during flight, but in this scenario, I talk about how to build a ready-to-ship device for those who want to make business through this device.because my main goal is to help you build a drone payload release system, which is easy in the first and second scenarios, but not complicated in the third scenario, which needs an electronic circuit.Although this circuit is simple, and I can do it for you in different ways, but when it comes to business and production, it's better to work on a good and strong design, and test it several times before production, because the slightest error will lead to bad reviews and low ratings, which lead to the failure of the idea from the beginningEven though, I made a simple circuit just for demonstration, using only a PNP transistor and a diode in addition to LDR and battery.This course also contains a full guide (PDF file) on how to avoid a drone crashing or falling into the sea while used in fishing, based on about 4 years of experience and more than 300 flights without any crashes.
