|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/bim-earthquake-resistant-design-with-etabs-1/
课程评论：没有评论
课程名称：ETABS Level 1/2 - 结构工程 - AulaGEO 课程概述：本课程的目标是为参与者提供ETABS建模程序的基本和高级工具。学员不仅能够进行建筑结构元素的设计，还将基于详细计划对建筑进行分析，使用市场上最强大的结构项目开发软件CSI ETABS Ultimate。在此项目中，将进行一栋8层住宅建筑的结构计算，并将楼梯、电梯和剪力墙纳入模型，这是本课程的主要重点。将详细解释CSI ETABS Ultimate软件的内部表格，遵循ACI 318-14标准，并在AUTOCAD软件中完成剪力墙的详细结构元素设计。 课程内容： - 讲座1：课程介绍 - 讲座2：网格及材料的定义 - 讲座3：柱子开裂截面的定义 - 讲座4：梁的开裂截面的定义 - 讲座5：剪力墙的定义及因素系统CD - 讲座6：柱、梁、墙和楼板的绘制 - 讲座7：楼梯绘制及荷载分配 - 讲座8：电梯荷载分配及墙体建模 - 讲座9：墙体的一般概述及刚性屋面的分配 - 讲座10：NSR-10设计谱 - 讲座11：NSR-10 P2设计谱 - 讲座12：NSR-10 P3设计谱 - 讲座13：ETABS中的设计谱NSR-10 - 讲座14：质量、模态数的定义，标准NS - 讲座15：15方法30%、SRSS荷载组合 - 讲座16：荷载组合，参与质量 - 讲座17：柱梁的一般概述 - 讲座18：导数验证 - 讲座19：动态剪力与静态P1的修正 - 讲座20：动态剪力与静态P2的修正 - 讲座21：动态剪力与静态P3的修正 - 讲座22：ACI318-14剪力墙 - 讲座23：ACI318-14 P2剪力墙 - 讲座24：ETABS剪力墙 - 讲座25：P1型PB墙体的详细绘图 - 讲座26：P2型PB墙体的详细绘图 - 讲座27：P1型墙的详细绘图 - 讲座28：P2型墙的详细绘图 - 讲座29：P3型墙的详细绘图 - 讲座30：分配到ETABS的P1型墙分析 - 讲座31：分配到ETABS的P2型墙分析 - 讲座32：分配到ETABS的墙体分析 - 讲座33：ETABS中墙体与柱体的组合 课程语言为英语，并提供多种语言的字幕，包括德语、阿拉伯语、中文、韩语、丹麦语、法语、希腊语、荷兰语、希伯来语、印尼语、意大利语、日语、葡萄牙语、波兰语、波斯语、俄语、瑞典语、泰语、土耳其语和越南语。
The objective of the course is to provide the participant with the basic and advanced tools of the modeling program, not only will a Design of the structural elements of the building be reached, the building will also be analyzed based on the detailed plans, using the tool most powerful in the market in the development of structural projects software CSI ETABS UltimateIn this project the structural calculation of an 8-level building for housing use will be carried out, with the incorporation of the ladder in the model, elevator, and cutting walls that is the main focus of this course.The internal spreadsheets of the CSI ETABS Ultimate software will be explained in detail. Depending on the ACI 318-14 standard. The detailed structural elements (Cutting Walls) in the AUTOCAD software will be reached.Content:Lecture 1: IntroductionLecture 2: Definition of grid and materialsLecture 3: Definition of cracked sections in columnsLecture 4: Definition of cracked sections in beamsLecture 5: Definition of cracked walls and factor system CDLecture 6: Drawing of columns, beams, walls and slabsLecture 7: Staircase drawing and assignment of escale loadsLecture 8: Load assignment to the elevator and malled of wallLecture 9: Generalities of wall and assignment of rigid diaphragmLecture 10: NSR-10 Design spectrumLecture 11: NSR-10 P2 Design spectrumLecture 12: NSR-10 P3 Design spectrumLecture 13: Design spectrum in ETABS NSR-10Lecture 14: Definition of mass, number of modes, standard NSLecture 15: 15 method 30%, SRSS load combinationsLecture 16: Load combinations, participatory massLecture 17: Generalities in beams and columnsLecture 18: Derivative verificationLecture 19: Correction of dynamic cut vs static P1Lecture 20: Correction of dynamic cut vs static P2Lecture 21: Correction of dynamic cut vs static P3Lecture 22: Cutting walls ACI318-14Lecture 23: Cutting walls ACI318-14 P2Lecture 24: ETABS Cutting wallsLecture 25: Detailed in drawings, wall of PB. P1Lecture 26: Detailed in drawings, wall of PB. P2Lecture 27: Detailed in drawings, wall of P1Lecture 28: Detailed in drawings, P2 wallLecture 29: Detailed in drawings, P3 wallLecture 30: Analysis of the walls P1 assigned to ETABSLecture 31: Analysis of the walls P2 assigned to ETABSLecture 32: Analysis of the walls assigned to ETABSLecture 33: Combination of walls with columns in ETABS#AulaGEOThe course is in English and contains subtitles in the following languages, German, Arabic, Chinese, Korean, Danish, French, Greek, Dutch, Hebrew, Indonesian, Italian, Japanese, Portuguese, Polish, Persian, Russian, Swedish, Thai, Turkish and Vietnamese.
