|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/become-a-haircutter-unit-4-6/
课程评论：没有评论
**课程名称：** 成为发型师 - 第 4-6 单元 **课程简介：** 本课程旨在教授发型设计的基础理论和实践技巧。通过结构化的工作流程，包括分区、头部位置、层次划分、梳理方向、梳理角度、手指位置和剪切线，学员将学习如何准确地进行剪发。本单元将重点介绍三种经典发型： * **单元 4：渐变中短发（Training Head 1）：** 在掌握了对角渐变后，本单元将重点教授日式中短发的修剪。与单元 3 类似，但修剪顺序略有调整，强调侧分线的吹风分线和剪切分线。 * **单元 5：渐变飞机头（Training Head 1）：** 这是一个经典的男士发型，其剪发原理与单元 3 相同，但采用对角向后的线条，配合 45 度梳理角度和侧分修剪。 * **单元 6：渐变碗状发型（Training Head 1）：** 另一个经典且可塑性强的发型。通过沿发际线分区，从前向后进行水平剪切，配合 45 度梳理角度，在头顶区域制造轻微的向上修剪，形成柔和的轮廓。颈部区域则采用垂直分区，使整体造型更显窄。 **学习建议：** 建议学员在动手实践前，完整观看每个发型的修剪过程，仔细观察细节。操作时，务必遵循循序渐进的原则。为了获得最佳学习效果，建议配备三脚架和两个训练头。
In this workshop you will learn all the theoretical basics to understand haircutting starting from the beginning. We explain to you the way we teach and how to use our training courses correctly. We will also introduce you to the 4 basic shapes that will help you recognize length arrangements and better understand workflows. To perform a haircut correctly you need a structured workflow: division, head position, section, combing direction, combing angle, finger position and cutting line. You will learn everything important on these charts.For optimal learning success, you will need a tripod as well as two training heads (Unit 1-12, then more training heads). Before you start cutting, watch each haircut once completely and pay attention to all details. Only then should you begin with the finishing work. Then work step-by-step! The easiest way is to get a holder for your smartphone so that you can attach it to the head stand.Unit 4: Graduated shape - short bob - training head 1If you are satisfied with your diagonal graduation from Unit 3, we can now work on a short bob together. The working method is almost identical, except that the contour cut is made at the end and not at the beginning. In addition, we are now working with a side parting for the first time. Important: There is a blow-dry parting and a cutting parting! For cutting, always part from the middle of the eyebrow to the highest point of the head. When blow-drying, you can then comb a slightly different side parting.Unit 5: Graduated shape - Firefly - training head 1A real classic! For over 60 years this shape has been needed again and again in salon work. We now work with a diagonal line to the back, the working principle is identical to Unit 3: contour section as a compact shape, then a graduation with diagonal sections and 45° combing angle, plus starting from a side parting as in Unit 4.Unit 6: Graduated Shape - Bowl Cut - training head 1Another classic from which you can derive many creative variations! First make a section along the hat line, then work out a horizontal cut line each time from front to back. Use a 45° combing angle and slightly cover the hair in the tamp area upwards - this creates a small rising step, which brings a soft contouring. In the nape area, work with vertical sections so that this area feels narrow.
