|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/become-a-haircutter-unit-1-3/
课程评论：没有评论
**课程名称：** 进阶美发师，第一至第三单元 **课程概述：** 本课程提供美发入门理论基础，讲解教学方法和训练课程的正确使用。课程将介绍四种基本发型，帮助学员识别长度排列和理解工作流程。要成功完成一次剪发，需要遵循结构化的工作流程，包括：分区、头部位置、片区、梳理方向、梳理角度、手指位置和剪切线。在深入学习过程中，学员需要准备一个三脚架和两个训练头（单元 1-10），之后可能需要更多训练头。建议学员在开始剪发前，完整观看一次剪发视频，仔细关注每一个细节，之后再开始精细操作，一步一步地进行。为方便学习，可使用手机支架固定在头模架上。 **单元一：圆形发型 - 水平 - 训练头 1** 这是剪发的入门课程。首先，进行轮廓分区，确保所有区域宽度一致。然后剪一个水平基线，所有后续头发都以此为准进行修剪。操作时使用水平分区，自然梳理方向和0°梳理角度。为了确保轮廓剪切线的精确性，需要将头部向前倾斜，在后颈部区域剪3-4个分区。这将导致顶部头发长度的增加（负圆形发型）。 **单元二：圆形发型 - 对角线 - 训练头 1** 在成功掌握水平发型后，课程将继续教授对角线圆形发型。操作方法与单元一相同，但在此基础上，从前往后剪一个直线对角线基线。这条线会笔直地延伸到颈部区域，并且只在颈部中部将两条对角线凹形地圆润化。所有其他头发都将以此基线为标准进行修剪。 **单元三：渐变发型 - 对角线 - 训练头 1** 要完成此练习，学员应已成功完成单元二的学习。在用对角线圆形分区剪出轮廓线后，继续聚焦后颈部区域，使用一个约4厘米宽的A字形分区。接着，进行枢轴式（pivot）分区，将头发以45°角梳理，并采用直角梳理方向进行操作。
On these charts you will learn all the theoretical basics to understand haircutting starting from the beginning. We explain to you the way we teach and how to use our training courses correctly. We will also introduce you to the 4 basic shapes that will help you recognize length arrangements and better understand workflows. To perform a haircut correctly you need a structured workflow: division, head position, section, combing direction, combing angle, finger position and cutting line. You will learn everything important on these charts. For optimal learning success, you will need a tripod as well as two training heads (Unit 1-10), then more training heads. Before you start cutting, watch each haircut once completely and pay attention to all details. Only then should you begin with the finishing work. Then work step-by-step! The easiest way is to get a holder for your smartphone so that you can attach it to the head stand.Unit 1: Solid shape - horizontal - training head 1Your introduction to cutting hair! First, make a contour section and make sure it has the same width all over. Then cut a horizontal baseline to which all further hair is worked towards. Work with horizontal sections, natural combing direction and 0° combing angle. So that the contour cutting line is exact, cut 3-4 sections in the nape area with the head tilted forward. This results in an increase in length in the top (negative solid form).Unit 2: Solid shape - diagonal - training head 1If you have successfully trained the horizontal shape, we now continue with the diagonal solid shape. The working method remains the same, but now you cut a straight, diagonal baseline from front to back. This runs straight diagonally into the neck area, and only in the middle of the neck do you round off the two diagonals concavely. All other hair is cut on this baseline.Unit 3: Graduated shape - diagonal - training head 1To complete this exercise, you should have successfully completed Unit 2. After you have cut the contour line with a contour section diagonally solid, you continue in the nape area with an A-shaped section. This should be approx. 4 cm wide. Now you divide pivotally, comb hair at a 45° angle and work with a right-angled combing direction.
