|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/automobile-vulnerability-and-security-3v/
课程评论：没有评论
**课程名称：** 汽车黑客与安全 v3.0 **课程概述：** 这是“汽车黑客与安全”系列的第三门也是最后一门课程。在前两门课程（v1.0 和 v2.0）中，我们深入探讨了 CAN 协议、OBD2 协议、ECU 模型等关键技术。 本课程将在此基础上，进行更具研究性的深入探索。我们知道 CAN 协议是现代汽车中广泛使用的有线协议，而本课程将专注于将其与另一协议结合，实现无线化，并接收无线 CAN 数据。 课程将使用 ESP32 开发板，首先介绍必要的 ESP32 基础知识。随后，我们将学习物联网领域流行的 MQTT 协议。我们将结合 CAN 协议和 MQTT 协议，构建一个基于 ESP32 开发板的无线设备。 该设备将被应用于真实汽车，实现无线获取 CAN-BUS 数据。此外，我们还将利用同一设备在 ECU 模型上进行 ECU 远程攻击。 这是一门前沿技术课程，旨在帮助学员发现现代汽车的潜在漏洞，为您的毕业论文和研究提供有力支持。
Welcome to the third and the final course on "Automobile Hacking and Security v3.0". This is the continuation of our previous two courses "Automobile Hacking and Security v1.0 and v2.0". It has been a long journey. We covered so many important topics in the previous two courses like CAN protocol, OBD2 protocols, ECU Models and many other things.But this course is going to be very different because this is a fully researched base course. If you have taken our previous course you should know that CAN is a protocol used in almost all vehicles nowadays and it's a wired base protocol but we are going to combine it with another protocol to make it wireless and receive wireless CAN data.We are going to use an ESP32 board in this course, so first we will cover the basics of the ESP32 board which are required for this course. Then we will look at the MQTT protocol which is a very popular protocol in the IOT world. We are going to combine CAN protocol and MQTT to create our own device which will be a wireless device. And this device will be based on an ESP32 board. We will test this device on a real car to get CAN-BUS data wirelessly. Then we will also use the same device on the ECU Model to perform ECU Remote Based Attack. So this course is a cutting edge technology course which will help find vulnerabilities in modern day vehicles and also help in your thesis and research paper.
