|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/autodesk-fusion-basic-course/
课程评论：没有评论
**Autodesk Fusion 360 基础课程：全面掌握三维设计与建模** 本课程是为希望从零开始学习Autodesk Fusion 360软件的用户量身打造的入门指南。课程涵盖了软件界面的基本介绍、草图绘制、参数化设计、实体建模，以及组件装配、自由形态建模和基础应力分析等核心功能。 **课程亮点：** * **循序渐进的教学：** 从最基础的界面操作到复杂的模型创建，每一步都清晰明了。 * **丰富的实践练习：** 包含33个实践讲座，总计约8小时视频内容，并提供练习文件，帮助学员巩固所学。 * **核心建模技巧：** 深入学习拉伸、扫描、放样、阵列、镜像等关键建模工具，并掌握草图约束、尺寸标注以确保模型精度。 * **组件装配与动画：** 学习如何通过“关节”将多个组件组合成装配体，并创建零部件爆炸图和动画。 * **自由形态建模：** 探索软件强大的自由形态建模工具，实现更具创意和复杂性的设计。 * **基础应力分析：** 了解如何进行基础的静态应力分析，为工程设计提供初步的性能评估。 * **工程图创建：** 学习如何从三维模型生成二维工程图。 **课程内容概要：** 课程从软件的**演示**和**介绍**开始，随后逐步深入讲解**模型控制**、**基本形状**的创建，以及**草图绘制**的技巧，包括**约束**的使用和**尺寸标注**以实现完全约束。接着，将学习**拉伸**和**旋转**等实体建模特征，以及**修剪**、**延伸**、**镜像**、**复制**和**阵列**等草图编辑工具。 课程还会教授如何利用**一个草图创建多个特征**，以及**圆角**和**倒角**的应用，**孔**的创建，**构造特征**的学习，**参数化尺寸（Equations）**的使用，**壳体**和**肋**的创建，**设计修改工具**，**特征顺序**对模型的影响，以及**直接建模**技术。 此外，课程还将深入讲解**扫描**、**放样**、**镜像**和**阵列**等高级建模工具，并详细介绍**组件装配**，包括**关节**的使用（Assembly Joints）和**装配内置关节**（As built joint）。 在课程的后期，学员将学习**工程图的创建**和**装配图的绘制**。最后，课程将重点介绍**自由形态建模**（Free form modelling）及其相关的**编辑**和**修改工具**，并为学员提供**静态应力分析**的初步入门。 **先决条件：** * 已安装Autodesk Fusion 360软件 * 互联网连接 本课程旨在帮助您全面掌握Autodesk Fusion 360的基本操作和核心功能，为您的三维设计和建模之旅打下坚实的基础。
Hello everyone!Welcome to the Autodesk Fusion 360 Basic Course.This course is intended for everyone who would like to get familiar with the Fusion 360 software, from very beginning, with no knowledge about it.Course requirements:Installed Autodesk Fusion software, internet connection.Course contains 33 Practical lectures, about 8 hours in video format. Below you will see the Course content table with four columns: No. - Number of LessonLesson Name - Name of the lessonFile name - The name of the file which is attached to the relevant lecture resource. In some lessons practice files should be used to learn how to use relevant design technique. To download the attached files please follow these steps:1. Create folder on the C drive, with name Autodesk Fusion Practice files.2. Download the attached to the lectures practice files and save in folder Autodesk Fusion Practice files on the C drive.3. During watching the lectures, You will be guided how to upload the practice files from Autodesk Fusion Practice files folder in the Fusion project.In lectures without practice files ( Not applicable), You should repeat instructor actions to learn the lesson.Lesson time - The length of the lesson in minutes:seconds Course content: No. Lesson Name File name Lesson time0. Presentation Not applicable 03:341. Introduction Not applicable 29:052. Control of the Model 2. BBQ 18:273. Basic Shapes Not applicable 18:154. Sketch in the Fusion 360 Not applicable 21:425. Extrude feature for 3D model creation Not applicable 15:406. Revolve feature for 3D model creation Not applicable 09:577. Constraints Application 7. constraints_1 09:018.1. Dimension and constraints to fully constraint the sketch Not applicable 13:458.2. Dimension and constraints to fully constraint the sketch Not applicable 14:529. Trim Extend Mirror 9. Trim_Extend_Mirror 04:1910. Copy Sketch 10. copy_sketch 08:0211. Sketch Patterns 11. sketch_patterns 07:2812.1. Extrude from sketch on the model 12.1 Extrude from sketch on the model part 1 09:0712.2. Offset in the sketch on the model 12.2 Extrude from sketch offset on the model part 2 05:2313. One sketch for multiple features 13. One sketch for multiple features 05:3614. Fillet and Chamfer 14. Fillet and Chamfer 09:4115. Hole creation Not applicable 14:5616. Construct Features Not applicable 21:5817.1. Parameter Dimensions by equations 17.1 Equations for dimensions 11:2317.2. Parameter Dimensions by equations 17.2 Equations for dimensions 2 09:5218. Shell and Rib 18. Shell and Rib 07:1219. Design Modify Tools Not applicable 07:0120. Feature order impact to the model Not applicable 07:0221. Direct Modelling 21. Direct modeling v2 11:2422. Sweep feature Not applicable 09:2523. Loft feature 23. Loft Feature 08:0824. Mirror feature Not applicable 06:4725. Pattern feature 25. Pattern Feature 14:3226. Assembly Joints 26. Assembly Joints v1 v2 21:2627. As built joint Assembly 27. As built Joint Assembly 19:3128. Drawing creation 14. Fillet and Chamfer 09:5329. Assembly drawing 29. As built Joint Assembly Final 21:5530. Free form modelling Not applicable 19:3031. Free Form Edit tool Not applicable 10:3432. Free form modify tools Not applicable 46:4133. Static Analysis Not applicable 16:49 TOTAL time: 8hr 22min During this course, step by step You will learn how to create design in Fusion , starting from interface of the software, then creating sketch, constraints, 3D model, combine parts by joints making assemblies, prepare exploded view in animation, then generating the drawing. As well as creating and modifying free forms and at the end the basics of static stress analysis.Thank You for participating in this Autodesk Fusion 360 Basic Course.
