|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/ats-panel-by-using-eplan-electrical-p8/
课程评论：没有评论
课程名称：阿拉伯语EPLAN电气P8 第三部分（自动转换开关面板） 课程概述：本课程介绍了如何使用自动转换开关（ATS）可靠地为重要负载提供双重电力源。通常，这些负载由电网变压器和备用发电机供电，以防变压器的电力中断。当主电源恢复时，发电机会自动切断，负载由变压器继续供电。课程将重点讲解在供电过程中如何确保可靠性，包括两个发电机或变压器的并联运行条件，及其在正常操作和电源故障情况下的使用流程。了解这些知识能帮助学员掌握如何通过ATS系统调度连接和断开发电机与变压器的操作。
Important loads are usually supplied using two sources of power. The two sources are usually the transformer of the utility and a stand by generator used in case of the power of transformer is gone.If the main power has been activated again, the generator will be switched off and the load will be supplied from the transformer. This process is organized and performed using a device (Circuit) called Automatic Transfer Switch (ATS).It is very important to provide reliability during the process of feeding loads. This can be achieved using many different ways. One of these methods is the parallel operation of two generators or transformers after satisfying the parallel operation conditions in each case. Another method is to use a stand by generator.During the normal operation the transformer feeds the loads and the generator is out. If the main supply is gone, the generator is built up-manually or automatically- and feeds the loads. In case that the main supply has been came back,, the generator is switched off and the transformer feeds the loads. The operation of connecting and disconnecting the generator and transformed can be scheduled using a system (control circuit) called ATS which stands for Automatic Transfer Switch.
