|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/arubaos-cx-on-gns3-for-labs-emulation/
课程评论：没有评论
**课程中文摘要：** 本课程名为“GNS3模拟器上的ArubaOS CX实验室环境搭建”，旨在帮助网络工程师利用免费的GNS3模拟软件，在个人电脑上搭建ArubaOS CX环境。 **课程亮点：** * **解决实际问题：** 普遍认识到Aruba网络设备流行度日益增长，但购买真实设备成本高昂。本课程提供了一个经济高效的替代方案。 * **免费模拟：** 通过GNS3和ArubaOS CX，您可以免费创建和测试虚拟Aruba路由器和交换机。 * **全面指导：** 课程将涵盖搭建ArubaOS CX模拟环境所需的全部步骤，包括： * 所需软件的下载。 * 软件的安装过程。 * 将GNS3 VM导入GNS3软件。 * 在GNS3中安装ArubaOS。 * **实践操作：** 课程将通过一个实际的实验来展示效果，例如连接两个Aruba L3交换机并验证其连通性。 * **目标：** 最终目标是让学员能够在自己的PC上成功运行Aruba设备模拟，从而自由测试各种网络场景。 本课程非常适合希望在不投入大量资金的情况下，深入学习和实践Aruba网络技术的网络工程师。
Aruba Networks is becoming very popular day after day. A lot of companies and network engineers are using Aruba products in their network. You, as a network engineer, if you want to run an Aruba LAB you require to buy real equipment - This costs a lot of money. Instead, you can use GNS3 emulator software with ArubaOS CX to emulate Aruba Routers/Switches and YES it is free of charge.In this course, I will show you all steps that you require in order to have ArubaOS running on GNS3 so you can create virtual Aruba Routers/Switches and test any scenario that you wish to test. This would work exactly as you are using real Aruba equipment:)I will show you what are the softwares that you require to download, then I will show you how to install them and how to import GNS3 VM into GNS3 software, then I will show you how to install ArubaOS on GNS3. When doing that, I will run a LAB and will connect 2 Aruba L3 Switches to each other and try to see if they can see each other.This is the whole thing that I will do in this course, I hope you will join me so at the end you can run an Aruba emulation on your PC.
