|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/arduino-for-everyone-using-tinkercad-circuits/
课程评论：没有评论
**Coursera 课程总结：Arduino 从入门到精通 (使用 Tinkercad Circuits)** 本课程专为完全零基础的初学者设计，目标是消除大家对 Arduino 编程和电子学的恐惧。我们将深入浅出地学习电子学和编程的基础知识，并利用 Tinkercad 这一强大的在线仿真与编程平台。 **课程亮点：** * **零基础友好：** 即使您没有编程或电子学经验，也能轻松上手。 * **Tinkercad 平台：** 学习使用开源的电子仿真和编程平台，无需实体硬件。 * **Arduino 编程入门：** 以最简单易懂的方式教授 Arduino 编程，让您告别代码恐惧。 * **传感器深度解析：** 详细讲解各种传感器的工作原理和接口方法，包括数字传感器和模拟传感器。 * **实战项目驱动：** 通过一系列贴近生活的项目，巩固所学知识。 **课程内容概览：** 1. **Arduino 基础与电子学入门：** 了解 Arduino 的基本概念，学习基础的电学和电子学原理。 2. **交通灯项目：** 学习如何编程控制交通灯，理解其在交通疏导中的应用。 3. **按钮与蜂鸣器控制：** 掌握如何使用按钮控制蜂鸣器的开关。 4. **传感器技术：** 深入理解数字传感器和模拟传感器，并完成一个运动检测项目。 5. **模拟传感器实战：** 学习如何连接模拟传感器，并完成以下项目： * 基于 LDR (光敏电阻) 的智能 LED * 基于超声波传感器的障碍物检测器 * 基于柔性传感器的蜂鸣器和 LED 控制 * 基于力传感器的物体受力检测 6. **电机控制：** 学习如何连接和控制各种电机，包括： * 直流电机 (DC Motor) * 伺服电机 (Servo Motor) * 制作基于电位器的直流电机调速控制器 **学习成果：** 完成本课程后，您将具备运用 Arduino 和 Tinkercad 解决实际问题的能力，对电子工程和编程有扎实的理解，能够自信地进行 Arduino 项目开发。
In this course, we'll learn about the Fundamentals of Electrical, Electronics engineering, and Coding.Here we are using Tinkercad Platform the open-source electronics simulation and programming platform.By attending this course you will not have fear of coding Arduino. We will learn about coding the Arduino most simply. We will learn about how to interface the different sensors with the Arduino. How do the sensors work what is the operating principle? We will interface electric motors with Arduino and try to create real-life projects using the same. But what's different in this course is that I have tried to explain every minute detail, so that you will never have a doubt, from understanding how the sensor works to interfacing the sensor with Arduino. We will clear all complex concept most simply and you will never feel electronics & Coding is difficult.Even If you do not have any experience with programming or electronics, that's OK! Because this course is designed for the absolute beginners. We are going to start understanding Arduino and learn the basics of electrical & electronics engineering.We will learn about how to make the traffic lights project and how they are programmed to control the flow of traffic.Then, we are going to learn what is a buzzer and how we can able to control the buzzer using the push buttonAnd after that, we will understand what is a sensor, learn about two types of sensors is a digital sensor and an Analog sensor and we will make a motion detector project. Following that, we are going to see how to interface analog sensors with an Arduino and we will create different projects like smart LED using LDR sensor, obstacle detector using ultrasonic sensor,Controlling buzzer and led using flex sensor, detecting the force applied on objects using force sensor.Finally, we will interface the electric motor with an Arduino first we will interface the DC motor, Servo motor, and last we will make the speed controller for the DC motor using the potentiometer.Upon completing this course, you will have the skills and knowledge needed to solve real-life problems.
