|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/aisc-steel-design-course-part-2-of-7/
课程评论：没有评论
**课程名称：** AISC 钢结构设计课程 - 第 2 部分（共 7 部分） **课程概述：** 本课程是第一部分的延续，第一部分主要介绍了结构钢设计及其设计方法。第二部分将深入探讨**钢结构拉杆构件的分析与设计**。课程以 AISC 360-22 规范（这是课程创建时最新的规范）为指导，时长约五小时，将深入讲解钢结构拉杆设计的概念和提供丰富的实践案例。 **课程主要内容：** 1. 拉杆构件简介 2. 拉杆构件的公称承载力 3. 净截面（含一个案例） 4. 错列孔对构件强度的影响（含四个案例） 5. 有效净截面（含四个案例） 6. 拉杆构件的连接件设计（含一个案例） 7. **块剪切（Bolt Shear resistance）**（含三个案例） 8. 构件截面选型（含两个案例） 9. 组合拉杆构件（含一个案例） 10. 拉杆和拉杆（含一个案例） 11. 销连接构件 12. 疲劳荷载下的设计（含一个案例） **课程特色：** * 每节课后都设有具挑战性的随堂练习。 * 课程内容深入，理论与实践相结合。 **适合人群：** 希望拓展钢结构拉杆设计知识的学习者。 **后续课程预告：** 下一部分课程将转向轴压杆构件的设计与分析。
This course is a continuation of Part 1, which dealt with pretty much the introduction to structural steel design, and design methodologies. Part 2 of the AISC Steel Design Course, will deal with the analysis and design of tension members. ASIC 360-22 has been used as a guide, which is the last spec, available at the time of course creation. This five-hour course dives exceptionally deep into the concepts and practical examples relating to steel tension design.The following topics will be covered in this part of the course:1) Introduction to Tension Members2) Nominal Strength of Tension Members3) Net Area with one example4) Effect of Staggered Holes with four examples5) Effective Net Areas with four examples6) Connecting Elements for Tension Members with one example7) Block Shear with three examples8) Selection of Sections with two examples9) Built-up Tension Members with one example10) Rod and Bars with one example11) Pin-Connected Members12) Design for Fatigue Loads with one exampleAt the end of each section, you will face two challenging assignments.Come and join me in this course, to expand your knowledge of steel tension design.In the next part of this course, we will discuss the design and analysis of axially compression members!
