|
所在平台: Udemy |
课程主页: https://www.udemy.com/course/aircraft-systems/
课程评论：没有评论
**课程名称：飞机系统** **课程概述：** 本课程深入探讨了飞机系统，重点介绍了航空业广泛使用的 ATA 100 编号系统。该系统作为商用飞机文档的通用参考标准，极大地促进了飞行员、飞机维修技术人员和工程师的学习与理解。 ATA, 即航空运输协会，于 1956 年 6 月 1 日发布了该编号系统。尽管 ATA 100 系统后来已被取代，但其在 2015 年之前仍被广泛应用于各种场景，特别是在文档编制方面。它在通用航空飞机、飞机故障信息（用于故障排除和飞行后维修）以及确保飞机正确运行和航空安全所需的电子和印刷手册中发挥着重要作用。随着技术的不断发展，该系统为全球航空安全和发展做出了持续贡献。 课程还会介绍由美国联邦航空管理局（FAA）监管支持司（AFS-600）制定的联合飞机系统/组件代码表（JASC）。JASC 代码表是对 ATA 规范 100 代码的修订，采用了新的四位数格式和简洁的代码标题。对原有标题的修改旨在更清晰地说明代码的预期用途。JASC / ATA 100 代码的最终版本由 FAA 于 1999 年发布。
The ATA 100 contains the reference to the ATA numbering system, which is a common reference standard for commercial aircraft documentation. This commonality allows for greater ease of learning and understanding for pilots, aircraft maintenance technicians, and engineers. The standard numbering system was published by the Air Transport Association on June 1, 1956. Although the ATA 100 numbering system has been superseded, it continued to be widely used until it became out of date in 2015, especially in documentation. for general aviation aircraft, in aircraft failure messages (for troubleshooting and post-flight repairs) and electronics and printed manuals that are necessary for the correct operation of aircraft and thus the security that continues to grow in aviation not only in one country but internationally thanks to the continuous technological advances that are more innovative every day.The Joint Aircraft System / Component Code Table (JASC) was a modified version of the Air Transport Association of America (ATA) Specification 100 code. It was developed by the FAA's Regulatory Support Division (AFS-600). This code table was constructed by using the new four-digit format of the JASC code, as well as by using a short code title. The abbreviated titles have been modified in some cases to clarify the intended use of the accompanying code. The final version of the JASC / ATA 100 code was published by the FAA in 1999.
